Recent content by 0verland3r

What's the minimum print area needed and how much filament? Considering buying a 3d printer to do this and want to make sure I get the right setup.

I've been running this suspension for a couple months now. I'm now debating removing the front swaybar to improve the offroad ride quality. It seems like it is composed enough to handle running without. Would love to hear feedback from those that have removed the front swaybar.

Vertical... No question.

I installed it with the no compressor method and it was extremely easy. Having installed multiple variations of suspensions on my FJ, I would say the no compressor method was just as easy, if not more so than installing preassembled. The reason I say that is that the back bolts on the tophats...

Just sharing my experience with this suspension since there has been several posts going back and forth about driver side lean. I installed both front shocks with the clip on the top ring. The difference side to side is negligible. Less than 1/4in in front and back is even. The way I look...

The placement is set by a snap ring on the resi body. Unless the groove for the ring is in a different place for the FJ than 4Runner they should sit the same. Actually now I'm really curious to know if there is a difference.

Dropped from 42 to 35 psi and retorqued everything just to be safe. Made a considerable difference. I'm used to running higher psi, but seems like on the 4rumner the sweet spot is lower. Caster Driver: 3.5 Pass: 3.3 Thanks for the suggestion!

Thanks for the info, I'll keep an eye on it. I wouldn't call the ride too stiff. It's just more so than stock. And a different ride than my old setup on my FJ. The digressive valving is just different than the progressive valving I'm used to. Also my ride is a bit firmer because I am...

Glad to know I'm not going crazy. I'm assuming that after alignment they pushed the caster more forward so it's more pronounced than it was before aligning. The suspension is considerably better than what was stock on my SR5, but a little more harsh on initial bump than the Fox suspension on my...

I installed this suspension a few weeks ago. Accomplished everything that I wanted it to. After alignment, I've noticed that I can feel a lot more of the small cracks in the road in the pedals and floor board. Large bumps and dips are absorbed perfectly, just the little stuff makes it feel...

Placed my order for this kit from Toyota Parts Factory (Camelback Toyota). They emailed me to say that it is a manual order request item and that it will take up to 3 days for it to arrive to them before they can ship it out. So hoping to get it the week of the 2nd. It should be a great...