Recent content by 1997

  1. 1

    4runner brakes seizing up...

    Are they rebuildable? If I can just order a caliper rebuild kit, then that would be a cheap way to rule it out. And I might end up doing the conversion but since I would have to buy new rims and tires it might be a while.
  2. 1

    4runner brakes seizing up...

    oh and I forgot to mention that I used a C-clamp to compress them and did not break apart the caliper to do it. After re installation, I bleed all 4 brakes in the order described on this forum.
  3. 1

    4runner brakes seizing up...

    The reason I thought it may be the abs is because some abs systems have the ability to trigger breaking in accordance with traction control to stabilize the vehicle. My range rover was like that. I also thought it may be an electrical problem because both wheels lock at the same time and I find...
  4. 1

    4runner brakes seizing up...

    I was driving in the rain the other day and when i slammed on the brakes to keep from hitting someone, the vehicle came to a screeching halt. When i tried to drive again, it wouldnt move. It was to the point where i could floor the accelerator and the one of the rear tires would spin so i...
  5. 1

    1997 4runner not starting after timing belt replacement

    It wasn't line up with the paint marks either when I tore it apart so it must have slipped since it was running well for a week.
  6. 1

    1997 4runner not starting after timing belt replacement

    I got it running. It turns out that the machine marks on the cam sprockets and crank sprockets are not to be trusted. I line it up by the paint on them and it started right up. Thanks for the help.
  7. 1

    1997 4runner not starting after timing belt replacement

    So I turned the cranked forward 360 degrees then lined up all the marks again. I also pulled the intake to clean the valve covers and replace the gaskets, plugs, and wire. When I put it all back together last night I left all the accessories and belts off the front engine to confirm that it...
  8. 1

    1997 4runner not starting after timing belt replacement

    I went back and read my post and I accidentally made it sound bad but I did know about the timing job just didn't suspect it as an issue until I had pulled the timing cover. The shop obviously had no clue what they were doing so I didn't want them to touch it again anyway. The there are 3...
  9. 1

    1997 4runner not starting after timing belt replacement

    I recently purchased a 97 with the 3.4 in it that was hesitating and had the CEL on. When I ran codes it said multiple cylinder misfire and a separate code for each cylinder totaling 7 codes. I was thinking coil packs plugs and wires so I went ahead and got it. Then the owner informed me that he...

Members online

No members online now.

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service
Back
Top