Recent content by 4RunnerBoise

I posted on this several months ago but never got any help, hoping to reach an administrator. Back in December I stopped getting daily emails on updates to the General and 5th Gen forums, I have unsubscribed and resubscibed numerous times but still don't get anything. I use gmail, have checked...

I stopped getting daily emails for new or upgraded threads on subscribed threads back in mid December, wondered if anyone else was having the same problem. I can’t find any postings about this and I have not changed any of my settings .

Here is a link to a Thule Motion XT Alpine on a Gobi Stealth. This is a super long box. http://www.toyota-4runner.org/5th-gen-t4rs/265757-gobi-stealth-rack-thule-motion-xt-alpine-roof-box.html

I have Shrockworks sliders, skid plates and front bumper and am also debating their rear bumper so would love to see as well.

First pic shows "claw" clearance to mesh deck, next is clearance at front cross member, next two are clearance at rear cross member, then view with tailgate up and front and side views

Have the Gobi Stealth (no front rise option) and wanted to add a roof box for those darned long XC skis. Ordered a Thule Motion XT Roof Box but had two concerns: Mounting "claw" to mesh web deck of roof rack clearance - okay but not by much Interference with front and rear rack cross members...

Ordered from Cascadia and got in less than a week. Installed today and bracket fit just fine (first photo) and the second photo is the finished installation, had to go with 1/4" longer bolts for the fairlead. I am using a Daystar winch isolator and I haven't quit figured out how to cinch the...

First picture shows the very stout support on the driver's side front of the gas tank skid. From the back of the flange behind the second bolt (the one on the right) is 38" unsupported to the back of the gas tank skid. Second picture is my added support. It uses the two holes present in the...

I have a WARN 9.5xp mounted on a Shrockworks front bumper. The winch uses four forward facing mounting bolts, two at the bottom which also hold the roller fairlead and two at the top. I was hoping to use a Cascadia V2 Flipster license plate bracket but am not sure it will work. All the...

I also got the full set of Shrockworks skid plates, I felt like the driver side rear of the fuel tank skid needed an additional support which I had a local shop make, wondered what you thought.

https://www.motor.com/magazine-summary/diagnosing-toyotas-key-off-evap-sy nostem/ Here are the details

Will be interesting to see how they reply. I put the full set of skids on a couple months ago and had hardware issues (both missing and extra) but don't recall the specifics for the engine skid as I did the full set. I found the aluminum spacers to be too long so replaced them with a stack of...

Gobi ladder is an easy install. You will want the upgraded lift struts as well and will also want to install some protective film behind the ladder. http://www.toyota-4runner.org/5th-gen-t4rs/241396-protection-behind-ladder.html

It should also allow you to carry a sheet of plywood on the rack.

Thanks! Have been trying to figure out how to do this for weeks.