Recent content by aaron_clt

that seems like a big diff though. i just went from the toytec superflex HD (2.0" Medium Load with 150 -200LBS additional weight) to the Dobinson C59-327 (2.0-2.25″ Heavy Load with 200-400 LBS additional weight) and there is no height difference at all when stood next to eachother. that step...

i know i know....have already read through others posts on the topic, there's not a ton of feedback/agreement though on which ratio for 34's. Everyone seems to think 4.88 for sure on 35s, runnin 33's then go 4.56 (or just stay stock). looking for anyone with actual experience re-gearing on...

I recently installed some Morimoto XB headlights and everything was working fine for about a week. Suddenly the Right Headlight (passenger) side DRL stopped working. I troubleshooted everything I could think of including creating a seperate wire harness for the right DRL power to make sure there...

Morimoto instructions say to use the add-a-fuse to tap into the INJ but I already have my switch pros sp-9100 tapped into the INJ port. Has anyone just cut the add a fuse off the Morimoto drl harness and used a switch pros input for the DRL power? Any functionality lost? Sent from my...

follow up: ended up being a bad power module on the SP 9100 itself. Sent it back to Switch Pros after filling out thier troubleshooting form which required some pictures, Ohm measurements, and install info. They sent me back a new power module within 2 days and its all working fine now

Over the last few weeks my SP9100 has been acting erratic. The issue began with the unit's "memory" setting not working so when I started the car, accessories that were on when vehicle was previously turned off did not automatically return to their previous on/off status even though the memory...

2020 TRD Pro hey, saw in the install instructions that a DRL harness needs to be tapped into the fuse box with an add-a-fuse. my question is if its possible to run this to a switch pros instead. thinking i would gain more control of the DRL, but would i loose functionality on the steering wheel...

Looking for some suggestions on where problem lies... I installed the redarc bcdc1225d kit in my 2020 4runner about 3 weeks ago and this week started having issues with the low voltage cutoff tripping my switch pros sp9100 off. I have it connected to the my secondary Full Throttle 750-35g...

i have the elka 2.5 DC's, you can buy from different distributors with the option for 650lb springs which is what i did. Elka does say they tune for the 700lb but until i add some weight i figured it wouldnt hurt to go down a tad to the 650s. i think it right great form my experience

Contact Derek at @sdoffroadmt on IG, for pricing and packages, I bought mine with a few add-ons and already had some of the blue seas accessories so it kinda depends on what all ya want to include with the mount. Sent from my SM-G998U using Tapatalk

SDoffroadMT makes great mounts, have the outlet running back to a manifold with the coupler located just beside the hood strut Sent from my SM-G998U using Tapatalk

my build.... Gear Project

I think the Sherpa is superior due to their mounting system....silicone can get gunky, fail if not applied right, and needs maintenance. I love my Crestone. You can do similar things with the Sherpa adapt plates (although they dont drop lower than the side rails like the westcott plates), but...

Since it sounds like you really wanna maintain the r&d that goes into the fox pro suspension id put the eibach kit at the top of the list. They make the springs for most OEM applications and they designed and tested that kit tuned specifically for those shocks. You want to maintain those ride...

Thnx, yeah I hear ya....guess I'm just thinking that if for the couple times I year I do run it pretty hard and hit technical obstacles if they would make big enough a difference to justify the overkill the rest of the year. Trying to work through situations where the bp-51s would fall short. If...