Recent content by amcnult1

40" 288 watt OZ USA Led Light Bar. Not really impressed with the mounting hardware, but the light is BEAST MODE!

Step 9: Hide your wiring. Once you have tested everything and have secured your connections zip tie all your wires out of the way and secure them from sight and where they wont get pulled or rub on anything. Step 10: put all your trim back on in the reverse order you removed it. Make sure...

Step 6: Route the power cord where ever you plan. If you plan on running the power cord inside the T4R then drill a hole large enough to place wire but at a location that wont kink or cause the wire to rub or break. I ran mine through the roof and down the windshield pillar behind the trim...

Step 4: Remove the trim pieces all the way back to the front seat belt trim pieces. after Steps 1-3 are complete the Trim pieces just pop out of the clips. use a flat head screw driver and start from one end and work back. (I started from above the seat belt and worked towards the dash.) To...

I bought a 40" light bar back in April and never got around to installing it, partly because Army schedule and partly for lack of information on 3rd gen light bar installs. After gathering what I could this is what I came up with and hope it helps anyone else out in the future. Tools i used...

Romping in Alabama Ft. Rucker AL area had to recover a Jeep...silly Jeep

When I put my wheels and tires on I realized I have a busted rear axle seal on the drivers side. I guess you can only enjoy cosmetics for so long before you have to start being a real mechanic again...ugh

Next I ordered some manliness for my runner. I got 84 series 16x8's steelies from summit racing for $57.00 apiece and 4 265/75R16's (32s) Mastercraft Courser MXTs. The tires are a new tire by Mastercraft with a very aggressive tread and good side biter as well, thought I would try them out and...

So I bought this back in February, 1997 Limited 4wd one owner with 87K on it! first thing to do was get the rust spots and dings out of the hood. Then I had to get the hideous silver trim off the car and make all the plastic match. I used the Bed Armor roll on truck bed liner on all the...

Thanks for the warm welcomes, and yah Silkr I have heard some stories as well. I will actually start flying in a couple months so I will try not to be a story for you to hear about...lol.

So I just got my first 4runner, 1997 limited, 4x4 e-diff and I am stoked to start my build. Paid 5800 for this beauty and here she is!

Hey guys my name is Austin and I am trying to get into the off road scene. I am looking to pic up a 3rd gen. I have been involved with MX5 Miatas for a while and just want to do something different. I have a degree in Automotive Technology, and currently in flight school with the U.S. Army...