Recent content by bis_1315m

Was wondering if I can put a non locking 4wd 4runner rear diff in my 2wd 4runner. thanks

Looking for a 3rd gen 2wd v6 4.10 working differential either local or not willing to pay shipping if its decent. thanks

You wouldn't happen to have the 3rd member for sale would you?

Well as soon as I find a good deal on a diff I will start with that and work my way through the other things. You think $350 is a good deal on a good used diff with 127k on it

I agree they definitely look nasty, I talked to a shop and they said if I can put it back in and bring the truck to them they well diagnose it for free for me. So I cleaned the diff up and come to find out those orange spots are not rust but paint or some stain that wiped right off and I...

weekend bumb

friday bumb

any opinions on how the wheel bearings look. thanks

so I found a diff at a junk yard for 150 seems like a good deal it's still in the case so should be able to tell if it's good or not hopefully.

Ok so removing the bearing caps would be a bad idea unless planning to rebuild. Is there anything I should be looking for to try check if it is bad or not. I figured it may be a little harder to find but from what I've read I can also use a Tacoma diff as well. I tried to diagnose the wheel...

I noticed these swollen bubbles on the passenger side wheel bearing is the a bad thing, the drivers side looks smooth like it should.

another pic

Hey guys I just pulled the diff I did not see any broken teeth so that's good however I did find some rust spots on some of them so water must have been in there at one point in time. I have not removed the bearing caps to inspect the bearings yet however they do seem to be covered in some...

great this is the puzzle piece I was looking for, so if I understand correctly when replacing the bearings I would also need to re-calibrate all the gear stuff. however if I find a diff with good bearings on it it would be easier and cheaper to go this route due to not needing the...

If 3rd member does only mean diff assembly then I dont see what the difference of me would be from replacing bearings to swapping in a different diff they both have to come out. Is removing the diff going to throw everything off or is that only if I take the actual gears apart. Sorry just a lil...