Recent content by Buckaroo93

Here's the deal. 2003 Limited V8 4WD. The RAS crapped out not long ago. Had a mechanic look at it and he replaced the RAS with coils. NOW I'm sitting 22.5" in the rear from center of hub to lip edge but 18.5" front. Don't need a lift in the rear but 3" in the front. (I don't mind a little rake)...

Here's the deal. The RAS crapped out not long ago. Had a mechanic look at it and he replaced the RAS with coils. NOW I'm sitting 22.5" in the rear from center of hub to lip edge but 18.5" front. Don't need a lift in the rear but 3" in the front. (I don't mind a little rake) I have some spacers...

Using 2.5" front spacers for leveling. The spacers I have use the typical set-up where it is mounted to the strut using the top hats' 3 top bolts. THEN there are 3 threaded holes between each of the 3 top bolts. This is where the supplied bolts run through the mounting "surround" into the...

Is it possible to install a 2.5" front spacer/leveler with the XREAS system? If so, how?

Where do I "pry" from? The outermost lip? Don't want to pry at the wrong place.

Ok Guys...this is the inside and outside of the driver side steering knuckle. Can the gasket be replaced? As you can see, it is pretty much destroyed with the spring thingy about to fall out. The pics got rotated 90 deg to the left. Sorry.

Ok Guys...this is the inside and outside of the driver side steering knuckle. Can the gasket be replaced? As you can see, it is pretty much destroyed with the spring thingy about to fall out. The pics got rotated 90 deg to the left. Sorry.

2003 V8 4WD Limited When my wife starts out in the morning, within 1/4 mile or less, the ABS Skid flashes/beeps several times, goes off then the VSC TRAC, VSC OFF lights come on and stay on. When she gets to work she turns it off. When she starts it up later in the day, everything is back to...

2003 V8 4WD Limited When my wife starts out in the morning, within 1/4 mile or less, the ABS Skid flashes/beeps several times, goes off then the VSC TRAC, VSC OFF lights come on and stay on. When she gets to work she turns it off. When she starts it up later in the day, everything is back to...

The rear bags finally gave out and they have been replaced with coils. However, the compressor still kicks on/off. How do I fix this?

I have an '03 Limited with Titanium Metallic body and cladding but the cladding is looking faded and rough. I would like to paint it a contrasting but complimentary color. What do you guys think? What color cladding? I was going to replace or paint the wheels too. What color wheels?

Today I updated to the v13.1 dvd. I thought doing this would, among other things, get rid of the annoying "I agree" start-up screen but no. I still get it. Is it supposed to be there regardless?

Ejected the DVD and reinserted.

Nevermind...I fixed it. :D

What does this message mean? And how do I correct it? Sorry for the rotation. It's correct in my photos.