Recent content by caadoptees

The link is back up.

Sorry, we no longer have the 4Runner so I stupidly removed the steps. Let me see about putting them back.

OK. A rather cryptic subject line. The grand experiment of putting the E7009 NAV unit in my wife's 4Runner has come to an end. I have never been able to get the voice nav working even with running a wire to the amp and connecting up the right wires. It didn't help that I got an AVIC-Z2 in my...

I am trying to get back on track with this. My wife is not happy that there is no voice guidance (that is voice output). I do have the wires between the HU and the amp (hopefully in the right spots). Is there any voltages, signals, etc. that I can check with a voltmeter to see if anything is...

You have any pics of this? Can you still use the steering wheel controls? Any information would be helpful. I am about to give up on the E7009 route.

How did this go? I am thinking about giving up on the E7009 side and doing the AVIC-Z2 since that is what I am putting in my truck.

I did not put in any jumpers. What would those jumpers do? Don't know the P/N of the amp. I may be taking off the side again soon. I will know then. Here is the conversation for the pins. Many thanks for the response.

Here is the latest in trying to get the voice navigation working. Maybe I just don't understand somethings. I have run the wire from the HU to the JBL amp. I got the correct pins from Toyota to fit in the connectors. I connected it like this: Amp S11-22 -> HU R13-12 Amp S11-23 -> HU R13-11...

Working on connecting the HU to the JBL amp. 'Hardwiring' is not cutting it. In the parts of the 20 pin connector where I need wires, there are no pins/prongs? The big question, where can I find the prongs that will work in that 20 pin connector? What have the successful users done for their...

Trying to get voice working Finally got back to trying to get voice working. I hooked up the two wires to the amp on Sat. Sunday I got the HU out and attached the 3 wires to the back of the HU. I also put in an XM addon while I was at it. Here is the problem. I have no sound. It was...

OK. I think it is more clear now. Looks like a fun thing to get to the amp also. I will psych myself up to do this this weekend. I will keep the board posted. Thanks!

Any responses are very welcome. I was not looking for a direct tap to the drivers door speaker but the connection between the IVO HU connections and the AMP connections as you did. I am looking for a closer place to FIND the AMP connections so I don't have to run the cable all the way to the...

That makes me feel better because that is how it is working. When we are stopped, irregardless of the gear, we can do anything on the DEST screen. Once we move, they instantly blank out. So the unit doesn't depend upon the GPS to show motion since it probably would be showing movement all the...

After a few hours of consternation, the '07 NAV from oemvalue is in our '05 Limited with JBL sound . I have posted some steps here. They are by no means all encompassing but hopefully they can supplement the information here on the forums. All appears to be working but I cannot verify the...

Thank you very much for YOUR response. I have all of them tapped. I have to do the voice nav connection yet. How would I verify that the speed sense actually is working? I know there is a thread that says what you will loose but I cannot verify that. Any help is appreciated.