Recent content by CO4x499

Like the title says. I swapped my battery and it started throwing these codes: P0171 -System too Lean (A/F Lean, Bank 1) Secondary DTCs- P0101 - Mass or Volume Air Flow Circuit Range/Performance P0138 - Oxygen Sensor Circuit High Voltage Bank 1 Sensor 2 I replaced the MAF, PCV, cleaned the...

Denso's site is showing: -Downstream 11.77": 234-4209 -Downstream 9.5": 234-4260 Rock Auto site only shows me one: -Denso: 234-4260 I'm rather confused. I need to replace both sides.

FS: 4th Gen Eibach Pro Lift Kit Stage 1 Springs Condition: Used with less than 3,000 miles Price: $225 Trade: Open to other springs that will work with 5100's Location: Fort Collins, CO

I did. The same codes all came back.

I'm looking at the Eibach Pro Stage 1 kit for my 2008 SR5 V6. It's stock at 180k. I'm curious if going with a taller lift will require other new components?

I installed a new battery and the engine is now throwing - P0171 -> P0101 -> P0138. I had it scanned it at AutoZone: - P0171 -System too Lean (A/F Lean, Bank 1) Secondary DTCs - P0101 - Mass or Volume Air Flow Circuit Range/Performance - P0138 - Oxygen Sensor Circuit High Voltage Bank 1...

I installed a new battery and the engine is now throwing - P0171 -> P0101 -> P0138. I installed a new battery and the engine is now throwing - P0171 -> P0101 -> P0138. Prior to the battery install I had never had a CEL come on since I've owned it. It's a 2008 with 180k miles on it. I don't...

Just started happening. https://streamable.com/7os0yt

Out of curiosity, do you know if the Eibach springs pair with a different shock? I have the springs, but no shock as of yet.

^ That's great, thanks so much. You're an awesome addition to this forum and I sincerely appreciate your help!

Thanks. I just wasn't sure with it's lift that the OEM control arms would work? How much did you lift raise the front? I spoke with Eibach and they say it's not adjustable, but I feel like I read people adjusting it's settings(?). This might seem funny, but my hesitation with this lift kit is...

On a stock 08 SR5 V6, what else would I need to replace on the vehicle if I went with the Eibach Stage 1 Pro Lift kit?

Is the best affordable way to go about color matching the tail gates rear handle cover to sand it down and color match it with spray paint? Or is there a cheaper or better way to go about it by replacing it with OEM/aftermarket part?