Recent content by docsnavely

2019+ Interior switches for back hatch release and window I just posted a new separate thread for my own DIY take of the "ultimate camping mod" or whatever people want to call it. I wanted to keep it separate from my build thread so it hopefully doesn't get buried and instead can be more...

I wanted to do a DIY version of the ultimate camping mod but realized once I opened up the back door trim that the wiring had changed at some point. Here's that thread if you're interested in what I discovered. I paid for the 2 day access to Toyota Information System (TIS) and spent nearly...

I appreciate your help and will definitely be bookmarking/downloading this manual. Unfortunately though it's a bit more complex than that. The issue isn't that wires went missing. They weren't included in this version of the vehicle. If the necessary circuitry was missing from the factory, the...

Hello, Friends! I started to do my own DIY rear door interior switch install for both the window and latch release. Needless to say, the information I have is out of date for my 2020 TRDP. I was following a mix of different threads with UtahRnr's post HERE as the lead example for the window...

Front Camera Installation My wife let me pick a mod for one of my Christmas gifts so I selected to add a front camera. After searching for a while, I chose to order THIS KIT from Anytime Backup Camera, mainly due the quality I've seen from other people's posts and the reportedly quick...

I’m selling my TRDP rack but doubt you want to drive to the northwest to pick it up. I shudder to think what it would cost to ship it.

You apparently failed to read what I wrote, or else you would have seen that I referenced OP's reply and explanation for how the water damage happened which was on the third page of the thread.

This is a bad reference though. The OP later explained how the damage in the initial post happened. He never once inspected the seals after putting the rack up. This happened more than 5 years after installing the rack. He linexed the roof up to the seams of the rack. He kept it outside in...

If you're submerging your entire back axle when launching or recovering a boat, you're either doing something wrong or you don't have the right equipment for the job. As for the necessity of breather relocation, that's left to the owner. I don't do lots of water crossings, but at the same time...

Thanks for your helpful feedback. I wanted a more permanent solution. To each their own.

A lock box. Amazon.com: Genuine Toyota Approved New Center Console Gun Safe Select 4RUNNER Models 00016-86184 : Automotive The picture below is the Tundra model. The 4Runner sized box takes up the whole under armrest space and doesn't have external catch all trays. Still room on top though for...

Sounds like a Jackery or something similar would be a good solution for you if all you're looking for is fridge/cooler maintenance and overnight device charging. These type of devices can be topped off with solar and managed with 12v DC or 120v AC supply. Plus they're mobile so you can carry it...

Hi all. I have been wanting to have a somewhat consistent view of my voltage so I swapped out the cigarette lighter for a Blue Sea voltmeter and relocated the lighter plug to the glove box. Here's the finished product. If you'd like to see a walkthrough with more pictures, I have it listed on...

12V monitor and plug relocation I wanted to keep a closer eye on my power so I decided to add a voltmeter. My cigarette lighter goes unused because I charge my phone through the nav unit and any accessories like the iPad or wife's phone gets charged through the Expedition Essentials Dash...

Of course. Appreciate the help. I plan on probably taking the head unit out Saturday to install the accessory panel. I’ll try to remember to pop it out and grab some pics of the whole plug.