Recent content by EvilMonkeyMike

It does have 31's on it. I'm going to look at this as a positive too, I guess. When I swap the diff ratios, what components need to be replaced? Can you replace the ring gear only, or is there more to it than that. Most experience I have with driveline, and for that matter auto repair in...

Makes sense. Thanks, that sounds a lot better than taking the diff covers off! Crap on a stick. If this thing has mismatched gears I'm going to throw some tools around the garage. Any idea how much it's going to run me to get a diff swapped out? Or...:gun5:

How do I check that? The housings are both stock... Does this mean I'm going to have to pull the diff covers off?

Oh where to begin... Bought a 93 V-6 Auto 4x4 back in July. It was a little rough and needed a few things here and there, but it's my work truck so I figured what the heck. First things first. I have replaced both front CV shafts, bearings on both sides, brakes and rotors in the front...

The plugs, cap, rotor are all new (replaced a few months before I bought it.) The plugs are NGK's, I guess I could pull them and check the gap, but other than that the ignition system should be tuned up. The fuel filter looks old, I guess I should probably swap that and see if I get any...

I'm getting similar MPG's with the 93 3VZE I just bought about 3 months ago. Since I bought it, I've done the following: Replaced the leaking valve cover gaskets, both sides Replaced the brake rotors/pads on the front Replaced the wheel bearings Replaced both CV shafts Replaced the EGR valve...

Sorry to necropost but... Whoever owned my 93 before me got around replacing the pan gasket on the transfer case by using black RTV silicone. Of course, now it's leaking again, and I've been trying to find a replacement gasket. You say you replaced the gasket, did you happen to get it from a...

I have a 93 SR5 V-6...I have been having problems to get it to go into Reverse and Drive, so I figured the linkage needed adjustment. When I crawled underneath, I found the linkage running on the left side of the transmission. On one end, where the rod connects to the shifter in the cab, there...