Recent content by Leebo

  1. Leebo

    3rd gen 4Runner Frame Rust Repair Kit

    Safe to drive? I'd say it depends on overall how bad the rust is and where. I never did follow up with my rust issue posting but I did get the ends of the frames fixed with the Safe T Cap items. After that, I then found more rust... this time on the driver side on the frame where the track...
  2. Leebo

    3rd gen 4Runner Frame Rust Repair Kit

    Glad I found this thread! My 99 4Runner has rust-cancer on the rear portion of the frame rails. The left side area where the hitch mounts to the frame is very bad, as well as where the left frame mounts to the rear body mount. The right side isn't quite as bad, but it's not far behind. The...
  3. Leebo

    P0300 P0306 Misfire fixed - fuel injector '99 4Runner

    I get it now. I was under the false impression that a misfile was only detected by way of ignition. BTW, a year later now and it's still running fine.
  4. Leebo

    P0300 P0306 Misfire fixed - fuel injector '99 4Runner

    Because changing the injectors requires pulling the intake manifold plenum which is kind of a pain, I didn't want to pull the injector, swap it out with one from another cylinder or rely on a test for an injector that works sometimes/sometimes not. That plus I needed to have the truck back in...
  5. Leebo

    P0300 P0306 Misfire fixed - fuel injector '99 4Runner

    Mattman, Thanks for the feedback. That helps clear up the P030x and explain how the fuel injector was related. OBDII is really helpful, especially when I fully understand the logic triggering the code. :happy: Very glad to have that head scratcher behind me.
  6. Leebo

    P0300 P0306 Misfire fixed - fuel injector '99 4Runner

    I know there are several threads on this forum about misfires, ignition failures, etc... but I thought I'd chime in with another story that might help someone else. This is for a 1999 4Runner SR5 with about 155k miles. I'm the original owner. It started out with a classic rhythmic stumble...
  7. Leebo

    When you guys fix rear axle seal....

    Z4R, thanks for those pics! Ah-ha... so you *can* get to the bearing cover with the bearing still in place. That's good to know for the future, possibly near future in my case. So this past Saturday I started in the garage to do two jobs: 1) differential extended breather mod and 2) replace...
  8. Leebo

    NEW TIRE: Michelin LTX M/S-2

    A few years ago, I was trying to decide between Bridgestone Revo's and Michelin LTX MS tires for my 1999 4Runner. I went with the Revo's. Turned out to be a mistake. With only around 1500 miles or so, I pulled them off, sold them at a slight loss and bought some Toyo Open Country tires from a...
  9. Leebo

    When you guys fix rear axle seal....

    Yep, that's exactly what I was thinking so thanks for confirming. I don't have any of the typical bearing symptoms from the rear so I'm hoping the bearings are fine for now.
  10. Leebo

    When you guys fix rear axle seal....

    I'm going to try to tackle both the extended breather mod and replace both left and right seals. I replaced the left seal months ago w/ a National seal but it still leaks. Now the right side is leaking. I bought Toyota seals this time. I really hope I don't have to change the bearings (and...
  11. Leebo

    Installing Shocks

    I completed the shock install over the weekend. Removing the front strut/spring assemblies is a breeze, and no... alignment settings are uneffected. I have some fairly cheap spring compressors that I've used on my miata (smaller springs) but I didn't trust them with the additional stress...
  12. Leebo

    Installing Shocks

    That may be true on some cars, but I really can't see how this would make a difference on the 4Runner; at least on my 3rd gen ('99). The caster/camber bolts aren't altered, nor the adjustment on the tie rod ends to effect toe. If I find otherwise after this weekend, I'll post back to clear up...
  13. Leebo

    Installing Shocks

    Hmmm... I think your mechanics are not right. I will be changing the shocks this weekend on my '99 4Runner, and I don't see how the alignment would be thrown off at all. None of the alignment adjustment fasteners would touched from what it looks like. To me, it looks like a pretty straight...
  14. Leebo

    Bridgestone Revo vs Michelin LTX MS

    Well, after having the tires rebalanced on a better balancer, the vibrations have improved. Also, there must be something way wrong with my tire pressure gauge because I apparently had 37psi all the way around (per the tire shop) although I measured 32psi at home. They lowered the pressure to...
  15. Leebo

    Bridgestone Revo vs Michelin LTX MS

    After about 1000 miles on the Revo's, I'm a bit less than pleased. They are a bit noisier than I expected. Guess I'll get used to that, but I'm thinking now that I should have gone w/ the Michellins. These new Revos are noisier than my worn out BFG Rugged Trails. Another gripe... road...

Members online

No members online now.

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service
Back
Top