Recent content by mastee

Hi, Is my bank2 sensor2 is faulty? - YouTube Thanks

Hi, My left turn signal has a pigtail harness connected to it and it hyperflashes, there are no LED anywhere, and I have looked at all the bulbs, the Hazard flashes all sides fine. I connected a DMM to see the current draw and saw it fluctuate between 0.002 Amps and 0.617 Amps on the high end...

Last month mine broke as well on one side, I just applied some jb weld at the end of the rod since the locking plastic clip/washer was busted and it is holding up just fine

Hello All, After trying all listred methods unsuccessfully to open the rear hatch, this is how I managed to fix it, now it works smooth as butter and hopefully will help others My 2004 4runner with 270K miles was owned by couple of wilderness guides from Moab, it came caked in sand and mud...

Sorry for the late update, but I did replace the boot with $5 NGK, and that took care of the problem. Although being baked but enjoying at Dave Crockett National Forest in Texas;), she been great in the backroads

Hello fellas, Just did a 3k mile trip from Seattle to Austin TX, eastern Oregon close to Rouge River, Western Colorado from Grand Mesa/Junction n hey 550 South via San Juan Mountains, loved it. Anyhow a few hours into the trip we noticed shaking at idle but only when I let the brake pedal go...

Well, I would like to remove the xreas components completely without spilling stuff all over or is it easier to drain it before I open the system? Edit: Well I took the front sway bar off today, already had a hiccup though, one of the bolts on the passenger side bracket sheared off, it is...

Embarking on a new wrenching journey mostly involving suspension components on my 4th gen V8. I am moderately experienced in wrenching, done 3 successful timing belts jobs and once did the struts and rear shocks on my 3rd gen but that was like a decade ago:). I will be doing the job in a 10x25...

Hello, So its been a few thousand miles since my TB kit install and its running fantastic, no leaks, coolant level unchanged and its been cool n smooth. Thread below documents the process and the problems I faced with the kit I purchased on ebay, it is still being sold and I will update how the...

So, I have tried the suggestions listed here/online and this guy just wont budge. The two levers on the actuator move when I try to open but seems like the little lever has probably broken off or something. I was thinking of cutting the top white plastic on the actuator and see if I can see...

Reporting another stuck tailgate on a 2004. I went through pretty much all the troubleshooting procedures on this thread but had no luck. The bad part is that no matter what combination of actions I do up/down together/separate with the two levers it does not open the hatch. I am not sure if...

Why not try some neodymium magnets for $2, It may be only needed on the visor if it sticks to the roof

I did this in a 10x25 storage unit, 15 mins drive away from home in PNW's coldest, dampest months which was not a good idea but I am glad it is done. !st time I did was in Atlanta heat:) I did not run into any problems in disassembly but my kit from ebay had a few parts that did not fit. Boot...

I paid 3k for my 04 v8 with 261k miles, with a number of things needed. TB, which I just finished last night. xreas r shot so once it gets a bit warmer ill be swapping in taco suspension, tranny flush, and other fluids. I also had the cracked windshield replaced for $220 and will be leaving a...

I vaguely before removing the Tensioner pulley that it moved back n forth about its FAT hex bolt. I am not sure if it was already loose when I got to it, because when I installed a new one (OEM Toyota) and torqued it, it seems fixed i.e.not moving at-all, am I missing a sleeve or something or it...