Recent content by narwhal

Selling factory tube steps from a '17 4Runner. Only on the truck for a week before I took them off. $200 Local sale only. Sent from my iPhone using Tapatalk

bump - price reduction

Yes, they are FJ cruiser rims. I forgot to add that when I copied the info from my post on the FJ forum. Tire size is 265/70/17. I had these mounted on my 98 4Runner for a while after I swapped my Duratracs to the FJ. Here's my understanding, as I've seen multiple backspacing numbers listed...

FS:Five 17" Stock FJ alloy wheels w/ tires $350 DFW, TX I have five stock alloy wheels with original Dunlops tires. Four tires have ~23k miles on them. The fifth was the spare and the tire has never hit the road. REDUCED: $350 Located in DFW, TX. Local pickup only.

They are from a 4x4.

No, I'd like to sell as a set.

bump for price drop

Stock FJ suspension $175 DFW TX Sold

Does the red light not push in? That's the valet switch on my 98.

I was just up in Silverton also. [/URL] Uploaded with ImageShack.us[/IMG]

My old setup was 2" spacers on stock shocks in front with Downey rears and OME N86. That rode perfectly level. I like the ride out back, it's comfy without feeling mushy. I upgraded to OME 90004s with TRD Tundra coils in the front and gained 0.5" in height, so I added two OME trim packers...

I started with stock shocks/coils and 2" spacers in front. When I switched to Tundra coils and OME shocks I gained about .5".

I found this installation on an FJ: IPF 968 Full install guide - Page 2 - Toyota FJ Cruiser Forum One difference between the FJ and the 3rd gen Runner is the ignition fuse is 10A on the FJ and 7.5A on the 4Runner. If I used one of these to connect to the IGN fuse like he did, would I re-use...

Do you have any pics of how the yellow wire taps into the high beam wire?

Thanks for the link Big Fish. On the relay mount, is that the screw that came with it? Did you just drill a hole there? As for the wiring, I may not have been clear about the fog switch. I don't have factory fog lights. I would like to use a factory toyota switch mounted in the slots to the...