Recent content by orcking

1.5Hours to do both... I dont think so... unless they have 4 guys one on each wheel... more like 4-5 hours min...

Oh well.. Re did the front and added the slotted shims under the solids.. Could not sleep if I did not do it..... Finished rear brakes as well with new rotors and pads... Took two days for both.. I hope I have good brakes for the next 50K... cost me $650 in parts..... I wonder how much the...

Yes, I removed the caliper to change rotors like I mentioned....... Where do you apply the anti squeak to the shims? all sides for both inner and outer shim and to the pad? I might just remove the new crap , clean my older shims that came from factory and reinstall them....

I finished the front brakes with OEM rotors, pads and shims. When I got the shims I saw that there were solid and slotted shims. When I removed my original OEM pads I only saw solid shims. So I only installed the solid new shims and threw away the slotted ones. Then I was reading that the...

Thanks So I am more confused now since I posted this thread 1- Gravity 2- Vacuum 3- Pressure bleeder 4- pedal pump Anyone knows what is the official Toyota maintenance procedure is? Here is what I found in the service manual: 1. REPLACE BRAKE FLUID (a) Turn the engine switch on (IG). (b)...

So is a vacuum pump necessary or gravity would work???

Thanks for the info. It seems that this is different from Car Care nut and he mentions no turning on of ignition. Also both do not mention to start in rear first which is odd. I am going to use the motive power pressure with air only to push the fluid down. and hopefully it should work...

I am thinking of getting a pressure bleeder to flush my brake fluid. what is the recommended PSI ? Rear right Rear Left Front right Front left anything else needed? keep ignition off or on for the abs to be flushed properly? Thanks

How about the wiring for automatic high beam. I thought the 2020 + would have the can bus wiring to the headlight.?

Thieves are now stealing cars via a headlight 'CAN injection' - Autoblog Anyone knows if the 4Runner has software updates to prevent such attack? This really sucks Lexus Stolen Off Driveway at 4AM in Vaughan, ON - YouTube

I would not let the dealer do a flush. It could ruin the tranny. Do the proper drain and filter change. I Told My Customer Not to do This, Now His Car is Destroyed - YouTube If you feel that they might have cheated you (possibility) redo it yourself. Assuring means nothing. That is why I...

I had the same experience. I just did the rear diff with Redline and mine did not drip till about 3.5qt-3.7qt weird....

I am speaking of the electronic dial on limited....

Actually, when engaging and disengaging the 4LOW, you have to give it some time in neutral, the light should be blinking and then when it is off, shift out. You are ok, do not worry about it.

DO not torque bolts more than 12-15 NM I am actually surprised that these can strip easily in the frame, as the frame is steel and not aluminum... and do not take it to dealer.. LOL