Recent content by roger123

i checked that out perfect......:dancin::dancin::dancin: thanks for that help

thanks been there ...have to check again

i had a mechanic look at those as well they appear fine .. if i rock the vehicle you can see the control arms moving on the bottom side

Need some expertise ...2 years ago I had a really bad sway in the back end when going down the highway especially when I had slight weight in the back. when you would hit a shallow hole the vehicle will rock.....struts are good and coils were replaced. The culprit at the time I believe was the...

i have to change the rack on the 98 sr5...has any one used cardone's rack. or suggest any other manufacture..the cardone rack has a one year warranty.

beware there are lots of dealers that are trying to sell you products that are nothing but glorified wax for hundreds of dollars...get your self a wax that has a high content of carnuba and apply it yourself. save your hundreds.

reply thanks for the info

My 98 needs a oxy sensor and I was told bank 1 sensor 1...went to the aftermarket supplier and he had only one listing from delphi #es20072....I got the impression he did not know what he was doing...left me unsure ..I have the sensor ,but can anyone tell me before I install if the frt and rear...

98 4 runner Im in Northern Ontario and they use a shit load of salt and sand..I just rebuilt the frt floors and it was"t pretty..I have under coated every other year with corroision free. The rust still finds it"s way to the frame. I have to go underneath and beat the frame with a hammer and...

Drivers side floor pan is rusted out...what guage metal should be used? A:shrug::shrug:lso around the mount bolt there is a oval plate that is very visible because of the rott but the bolt will not come out. I cannot salvage this plate..looked on line to find this piece but it does not show up...

reply that was very helpfull ...great step by step photos. should that steering shaft be disconnected reguardless of lift being installed. i plan on replacing with stock rubber mounts.

reply Pulled out all the seats quarter trim panels,rug was wet...loosened off 7 of the 10 body mounts ...both frt bolts under the dash and the rt rear under pass seat seized. drivers floor pan is very close to the flinstone car. I guess I will be busy over the next month. Going to check my a/m...

reply THANK YOU.....I do see the link now that you mentioned it..I checked it out all good to go... appreciate the help

reply I have not yet attempted to do any replacement ,due to the fact I am not sure if i need all 10 bushings, the rt mount under the dash seems to be the worst.pulled the rug back and the floor is cracked. The bolt head is rusted so badly that I won,t be able to put a socket on it. I did check...

:Cry: