Recent content by Sotovo

It is a new battery, so no worries there. Also, I started it with a jump start and allowed the vehicles to stay connected and charge for a while. So we're all good. As for you addressing the electrical issues, I'm really only seeing you stating has has happened. Could you please provide some...

About 4 months ago, I had Best Buy install an aftermarket Kenwood radio head-unit. Nothing else, just the head unit to start. 1 week ago, I got back in my truck and started it like usual. Of course when I started it up, the radio came on because I was listening to it before I had reached my...

The mechanic said he found a code for misfire on cylinder 3 - checked out the coil and sparkplug and found that the electrode on the end of the spark plug was completely broken off, he had never seen anything like this. while he had it open he ran a compression test and that cylinder was...

The mechanic said he found a code for misfire on cylinder 3 - checked out the coil and sparkplug and found that the electrode on the end of the spark plug was completely broken off, he had never seen anything like this. while he had it open he ran a compression test and that cylinder was...

LOVE LOVE LOVE my BFGs. They ride smoother than the street tires that were on when I bought them. Super comfy and quiet.

Low oil You guys are gonna slap me. I checked my oil levels and they were really low...didnt look like completely drained but very low. Does this seem like it could be the problem? I out in a few quarts of oil and the shaking has gotten better...let it warm up for a few minutes and its...

Update to the build thread - Took a trip to Jackson Hole, Wyoming late last year. Wanted to post a few pics from the part of the country this 4runner belongs in ;)

As the title says, Flashing CEL, Rough Idle, Engine Sputtering, Engine Ticking as well through low to mid RPM range..not mechanical at all so i dont even know where to start lol. Just happened on the way home from work...will be going and getting checked for codes tomorrow...anyone ever had...

plastidipped my bumpers, cladding, and fender flares today!

Just an update on what i've done to the runner over the past week! I wanted to give the runner a different look, so I bought some plastidip and went to town! I removed my BrushGuard so I could do the bumpers and all around! I also had to do the TRD decals. Here's a couple of pics of...

I just ordered TRD decals and I will be installing them as soon as i get them! Any tips or advice from anyone whos installed these before? I dont want any bubbling and I want it to install clean against the paint!

Not necessarily. I upsized wheels and tires without any compromise

I am going with the Billstein 5100s all around, TRD Tundra Springs/OME springs . It's about 2" lift and is reported to be so smooth and comfy. And it's cheap :)

It's called "A-Plus Toyota" - they used to be an exclusively toyota yard, but they've added on and now do all vehicles, But they still are mainly toyota. tons of stuff Its in the Garden Oaks area right outside of the 610 loop on N Shepard

Did a small cheap mod today! Swapped my center console out with one from a 99. It has the extra center storage and sits taller on the console! Before After New Storage! The lift is coming soon!! :D