Recent content by TheDarkKnight

Hey guys, I have a set of front and rear grey inserts with black sides seat covers from Wet Okole, these were on my cloth sport 2000 4Runner that was totaled, sadly. They have the lumbar support bags included. Price is negotiable, especially if picked up.

Bump.

Here's the main question, if the wires are left unplugged to the passenger seat, will the airbag still deploy during an accident?

So, I swapped the entire interior from a 2WD 2001 Sport to a 4WD 2000 Sport. I liked the grey better than the tan...That was one hell of a task. However, after swapping I'm noticing the wires that attach to the passenger seat and connect to the sensor (for the airbag: allowing the car to know if...

Per the title, I'm looking for a 3rd Gen Rear OffRoad Bumper with attachments (or ability to attach) either single or dual swingaways. Preferably with a camp table, spare tire, and camp table attached. I've been looking at CBI, Shrockworks, and 4X for a while. Though 1700-2200 a large amount...

SOLD!!! 2WD 3rd Gen located in Studio City, CA. Here she was decked out: Now back down to stock: 2001 Toyota 4Runner SR5 Sport 3.4 L V6 VIN: JT3GN86R310193674 Drive: RWD Odometer: 205,000 Paint color: black Title status: clean Transmission: automatic This has been a great truck...

Damn, that makes sense. Thanks, I'll look into it.

They were both working before the swap. Horn works. I don't think 2 clocksprings went bad while swapping steering wheels... Any advice?

All info I've found states the lift is double the measurement of the spacer. From experience the 881's net about 2.5 inches of lift. The toytec spacer is probably a .25 inch spacer since it nets about half an inch of actual lift. I'm looking for a little more, hence trying to find a middle...

I swapped a stock 2001 steering wheel from a 2000 4runner into my 2000 4Runner. The horn works, but the cruise control on both vehicles does not work. What gives? The clips were all attached and it looks like plug and play. Anyone have any ideas on the problem or a fix? Thanks in advance!

I'm not seeing them on their site. Does anyone know of a 0.5" spacer that equals 1" of lift? Seems like toytec adds 0.5"-0.75" of lift, meaning its probably a 0.25" spacer, and the smallest I can find, outside of that, is a 0.75" spacer for a 1.5" lift.

Learning something new, what's a lift sleeve? I've only heard of suspension, body, or spacer lifts.

Just figured out a 1" spacer will give me 2" of lift. You must be running spacers on stock springs? You've got spacers front and rear. I'm thinking either toytecs spacer for 1/2-3/4" lift up front or getting a 1"(2"lift) up front with 3/4" (1.5" lift) in the rear. All I have right now are...

What's your rear setup? I've heard the tundra/5100s give a full 3" vs the OME 2-2.5" Which shocks are you running in the rear? I have the 60027 and am thinking about going to the medium of soft shock since I rarely have more than 100lbs in the back.

Have you thrown spacers on? I have 891's sitting in my place in case I get an offroad bumper/more gear. But without the weight they ride like hell.