taylorharris50
Junior Member
I recently installed new speakers in my 2016 TRD Pro 4Runner and ran new speaker wires. In order to run them to the rear doors I drilled a hole in the molex connectors.
The passenger door is working properly but I can't get the driver side (rear) door window to work.
Does anyone have access to the Toyota Factory Service Manual that could drop a picture of the wiring schematic?
I assume that the red wires are for the speaker (no longer active).
Unsure about the 2 light blue wires, the yellow wire, and the black wire.
Sort of a mess to trouble shoot made worse by having had this project drag on for weeks with business trips.
Any help is appreciated!
The passenger door is working properly but I can't get the driver side (rear) door window to work.
Does anyone have access to the Toyota Factory Service Manual that could drop a picture of the wiring schematic?
I assume that the red wires are for the speaker (no longer active).
Unsure about the 2 light blue wires, the yellow wire, and the black wire.
Sort of a mess to trouble shoot made worse by having had this project drag on for weeks with business trips.
Any help is appreciated!
