**2013 SHROCKWORKS Group Buy**

[jdkilroy]

would the Shrockworks rear bumper with swing-out tire carrier (adjustable height?) and either single- or dual-fuel can holder be available as part of this group buy?

If it is for a Toyota, I would think, yes per the guidelines set out by the opening post(s).

 

[Logan714]

Done.

order id #7077

 

[Dusty Driftwood]

would the Shrockworks rear bumper with swing-out tire carrier (adjustable height?) and either single- or dual-fuel can holder be available as part of this group buy?

Yes, anything/everything for Toyotas is included.
You also get 15% off tee shirts, stickers, etc if ordered with a bumper/sliders/skids, etc

 

[mikey's2010SR5]

less chance for that additional 10% off though :cry2:

But remember its order date and they are a busy company.

I get paid on Monday then I place my order.

 

[mrtucker80]

Got the nod from the princess tonight so I will be calling Monday or Tuesday to set up the order.

Thanks again for the opportunity.

 

[HokieRunner]

Done! #7078.

Thanks again for all the legwork you put forth on this, Jeff. Much appreciated!!

:cheers:

 

[chmura]

Do you think shrockworks can make a custom slider with rear kick outs?

 

[Dusty Driftwood]

Do you think shrockworks can make a custom slider with rear kick outs?

Thats a great questions for [MENTION=63082]TxBxSx[/MENTION]
The answer is probably yes, but I doubt they'll be included in the GB simply because it would be custom work that'd have to go through R&D and they're already ramping up for their busy season. I'd be interested in Justin's answer too though.

 

[Scotty_h]

Orderd
#7087

Thanks Dusty for getting this together

 

[jdkilroy]

Do you think shrockworks can make a custom slider with rear kick outs?

Talking to Mark the other day, anything custom is definitely outside the group buy and is additional charge.

There are mixed feelings about kickouts; are you wanting them for wheeling or like the look better... or both ?

 

[wadle5]

And so it begins. . #7089. Now I need to start researching suspension for this bad boy!

 

[TOY2G]

Mark me as ordered Please.

 

[mrtucker80]

Order... Check!!

Ordered and got invoice. I guess with a phone order they don't tell you your order #, but the invoice says I ordered it so we will see in about 4 months, now to find a way to pass the time while waiting layball:

Thanks again for putting this all together.

Anyone know a good source for factory color match paint options? I know someone on here got some from NAPA, special made and I think I know where there is just such a NAPA that I have worked with in the past. Just have to find the cladding color code and start making some calls.

 

[mikey's2010SR5]

Put me down as PAID!

5th Gen Skids non-KDSS powdercoated black.

:rapture:

 

[TxBxSx]

Thats a great questions for [MENTION=63082]TxBxSx[/MENTION]
The answer is probably yes, but I doubt they'll be included in the GB simply because it would be custom work that'd have to go through R&D and they're already ramping up for their busy season. I'd be interested in Justin's answer too though.

We can cusomize your sliders in a number of ways, pricing depends on how much extra work is involved over our standard configurations.

Some things that have been requested in the past are things like kick-outs, round tube laid flat instead of angled up to provide a better step, and plating between the square and round tube.

As long as its not too wild, there is no reason why we cant throw it in on the group buy. Just give me a call at the shop for orders like this and we can talk about it.

 

[Dusty Driftwood]

Updated list of who has ordered/paid

1. HokieRunner: 4th Gen Front Bumper, black powder coat, 3 hoop, alum fairlead (Ordered)
2. derick2724: 4th Gen Front Bumper
3. Scotty_h: 3rd Gen Sliders (Ordered)
4. ATL4R: 5th Gen - Rear Bumper (yes, they still sell this)
5. t4rbama: 4th Gen- Front Bumper and fogs
6. mikey's2010SR5: 5th Gen 5 piece skids powder coated black non-KDSS (Ordered)
7. Blitzburgh99: 1995-2004 Tacoma Rear Bumper w/black powdercoat (local pickup, no shipping)
8. Wadle5: 4th Gen Front Bumper, black powder coated, three hoops (Ordered)
9. Logan714: 5th gen front bumper, powdercoat, center hoop only (Ordered)
10. chmura: 4th gen sliders
11. 10JQKA: 3rd Gen front bumper
12. 10JQKA: 3rd Gen rear bumper
13. 10JQKA: 3rd Gen sliders
15. Jangoforhire: 5th Gen 5 Piece Skids (Non-KDSS) - Black Powder Coat
16. jdkilroy: 1st Gen Taco front bumper and sliders if SW makes 'em (Ordered)
17. 4ShoreRunner: 5th Gen 5 Piece Skid, Bare Metal, Non-KDSS (Ordered)
18. TOY2G: 5th Gen rear bumper with tire carrier (Ordered)
19. Tytacoma89: 1st gen tacoma front bumper with full hoops and powder coat.
20. mrtucker80: 3rd Gen Front Bumper, Limited Width, bare steel, pre-runner hoop (Ordered)
[MENTION=85262]derick2724[/MENTION] [MENTION=72990]ATL4R[/MENTION] [MENTION=85382]t4rbama[/MENTION] [MENTION=83990]Blitzburgh99[/MENTION] [MENTION=46138]chmura[/MENTION] [MENTION=86656]10JQKA[/MENTION] [MENTION=78705]jangoforhire[/MENTION] [MENTION=91201]tytacoma89[/MENTION]
Remember guys, the discount code will NOT work after 1/31/13 at 11:59 CST so get those orders in. Also, please let me know via PM or this thread once you've ordered so I can get you marked off the list.
Thanks,

 

[mikey's2010SR5]

1. HokieRunner: 4th Gen Front Bumper, black powder coat, 3 hoop, alum fairlead (Ordered)
2. derick2724: 4th Gen Front Bumper
3. Scotty_h: 3rd Gen Sliders (Ordered)
4. ATL4R: 5th Gen - Rear Bumper (yes, they still sell this)
5. t4rbama: 4th Gen- Front Bumper and fogs
6. mikey's2010SR5: 5th Gen 5 piece skids powder coated black non-KDSS (Ordered)
7. Blitzburgh99: 1995-2004 Tacoma Rear Bumper w/black powdercoat (local pickup, no shipping)
8. Wadle5: 4th Gen Front Bumper, black powder coated, three hoops
9. Logan714: 5th gen front bumper, powdercoat, center hoop only (Ordered)
10. chmura: 4th gen sliders
11. 10JQKA: 3rd Gen front bumper
12. 10JQKA: 3rd Gen rear bumper
13. 10JQKA: 3rd Gen sliders
15. Jangoforhire: 5th Gen 5 Piece Skids (Non-KDSS) - Black Powder Coat
16. jdkilroy: 1st Gen Taco front bumper and sliders if SW makes 'em (Ordered)
17. 4ShoreRunner: 5th Gen 5 Piece Skid, Bare Metal, Non-KDSS (Ordered)
18. TOY2G: 5th Gen rear bumper with tire carrier
19. Tytacoma89: 1st gen tacoma front bumper with full hoops and powder coat.
20. mrtucker80: 3rd Gen Front Bumper, Limited Width, bare steel, pre-runner hoop

 

[cmiller]

Any news on 4th Gen skids? I'd be interested in a set for the group buy. I haven't heard anything in the other thread...

 

[chmura]

We can cusomize your sliders in a number of ways, pricing depends on how much extra work is involved over our standard configurations.

Some things that have been requested in the past are things like kick-outs, round tube laid flat instead of angled up to provide a better step, and plating between the square and round tube.

As long as its not too wild, there is no reason why we cant throw it in on the group buy. Just give me a call at the shop for orders like this and we can talk about it.

I just want a small rear kick out. Kind of similar what budbuilt has doesn't even as far out even. I like the hidden version of yours but just a slight rear kick out I would like.

Does that mean I can place my order?

If so let me know and I can place it.

 

[TOY2G]

two more days left and 11 people are pooping in the bed.....