Probably just gonna get some sort of handheld.. Bumpers aren't really in my budget right now, might pull the trigger on some sliders but most companies are built to order so don't know if I'll I have time
Don't know if I'm more excited for graduation or going to Moab for my first time.. Going to be lifted 3 inches on 33s, do you guys think this will be sufficient for most of the trails? Any things I should consider getting before the trip?
Still need to get a cb radio too.. What all do I need to get and where do you guys recommend I get it??
Probably just gonna get some sort of handheld.. Bumpers aren't really in my budget right now, might pull the trigger on some sliders but most companies are built to order so don't know if I'll I have time
Well my buddy heath is out. He decided he would rather put his moab money into his mr2 to get it ready for auto x. Grrrrr.
I hope my rig will do ok out there. I only have about 1.5" lift in the front from my coilovers, nothing in the rear right now, factory skids, no sliders and no bumpers. :/
I am on 33" bfg km's (the true size is 32.4 but they are as big as my buddys 33" bfg at's) and I do have the factory trailer hitch so hopefully that will help some but at the same time, I cant damage it much because I am hauling our jumping jack tent trailer down so....
SMKD13, I may have to hound you to help my tune my cb setup. lol
I will be installing a cobra 19 III along with a 4ft firestick this weekend.
I will also be rebuilding my supercharger nose cone before I come since it started squealing at me last weekend.
Maybe my savage sliders took three weeks to get to me. You might see if you can find a shop that will do a rush order for you. Just call around.
Ordered my sliders, should be here in a week or so! Noticed your running superflex coils.. What did you do as far as sway bar end links?
6. steezemcqueen /ToyTec*
- Dylan*
- Colorado
- 5/30-6/2
- Probably have a Taco with me*
- Camping at BFE most likely
Why do i have a star? I must be special or something :lol:
Anywho. List is getting chipped away at.
Needs:
Install crawl box *DONE*
Elocker axle swap *DONE*
Wire elocker *DONE
Fab a new t-case crossmember *IN PROGRESS*
Install UCA's *IN PROGRESS*
Replace front LCA bushings
LBJ's *DONE
New CV's *DONE*
Replace the front diff *DONE*
Alignment
Rear Lights
Mount the Rotopax
Reduce Ghettoness
Wants:
Plate the rear part of the frame. *Not gonna happen*
LT the rear with 2.5 remote resi's and air bumps *Not gonna happen*
TB/WP *Not gonna happen*
Tundra brakes *Not gonna happen*
Redo exhaust
Finish cargo box/sleeping platform
Figure out where to put the fridge
Ha ha I just did this like a few days ago. Not fun as an adjustment can was seized and tho was the carnage:
$22 bolt:![]()
Yeah if they are seized in there, i'm just gonna say fawk it and run them. The bushings have a little play but are mostly intact. [MENTION=21950]sn0wrunner[/MENTION]'s bushings were completely non existant.
What sway-bar do you speak of??? Loland very nice. Where did you get them from? Did the place do a rush job for you cause most places are a few weeks out?