2nd Gen Cup Holders

[bhicks22]

I'm changing this first post due to photobucket blocking all of the images in this thread. I don't want folks getting frustrated reading through it and not being able to see pics of the actual final cup holder designs so I will just stick them here on the first page to save you time. Here's the 2nd Gen cup holders final designs. All 3 versions are a double. They all look the same from the top but are very different underneath. They each have unique curvatures that match each unique console option. There is one for the 2WD auto, 4WD auto, and the manual console. You can order them on my site at Products | BH3D Printing or on my etsy page at www.etsy.com/shop/bh3dprinting

Here's the manual tranny version:
<a href="https://ibb.co/mPhyxQ"><img src="https://preview.ibb.co/kr6QcQ/P1000046.jpg" alt="P1000046" border="0" /></a>
<a href="https://ibb.co/gZGmj5"><img src="https://preview.ibb.co/f2fCP5/P1000031.jpg" alt="P1000031" border="0" /></a>

Here's the 4WD auto version:
<a href="https://ibb.co/iH2yxQ"><img src="https://preview.ibb.co/h0sLBk/20161102_113003_resized.jpg" alt="20161102 113003 resized" border="0" /></a>
<a href="https://ibb.co/htXCrk"><img src="https://preview.ibb.co/bUTkBk/20161102_112959_resized.jpg" alt="20161102 112959 resized" border="0" /></a>

And finally the 2WD auto version:
<a href="https://imgbb.com/"><img src="https://image.ibb.co/fW37P5/IMG_0601.jpg" alt="IMG 0601" border="0" /></a>
<a href="https://imgbb.com/"><img src="https://image.ibb.co/jsRSP5/IMG_0646.jpg" alt="IMG 0646" border="0" /></a>

 

[bhicks22]

Here's some shots of the 2nd Gen 2WD auto Design:

 

[bhicks22]

So I finally have a 4X4 auto console coming my way. Should have it delivered in the next few days. I should be able to get the manual and auto 4X4 cup holder designs wrapped up in the next couple weeks.

 

[teetrinh]

Can't wait! I need one for a 2nd gen

 

[SquirtleSoup]

Amazing work just saw the posts and would've gladly loaned you my center console can't wait to see the finished product and hopefully put in an order the Mrs would love one

 

[92blue3.slow]

I'm also very interested, 4x4 auto here. The stupid dash click-out cup holders are lame. I'm really looking forward to seeing the finished product.

 

[Dropzone]

interested in these too for the 4x4 auto.

I know the lines in the side of the product is from each successive pass of the printer but am curious if the lines could be sanded out/removed using some fine sandpaper

 

[DangerDanJD]

Interested in the 2nd gen 4wd version as well.

 

[Toolshed]

Count me in for a 2nd gen 4wd manual. good design!

 

[astynx]

I am interested, 4x4 auto. 2nd Gen. Your photos show tan color. Might this be available in the blue/gray.. light blue? color. Thanks.

 

[feusaf]

Count me in for one for a 94 4wd auto

 

[bhicks]

So the 4x4 manual console double cup holder is 100% done and I already make a large batch. Also have a batch of the 2WD automatic double cup holder. I'm about 90% done with the 4X4 automatic double cup holder. I will get pics of all 3 finished designs up this week and hopefully have them available on my website next week. I have a photo shoot thing set up tomorrow with a buddy that owns a 2nd Gen manual. I should have pics of that model installed really soon.

 

[bhicks]

I am interested, 4x4 auto. 2nd Gen. Your photos show tan color. Might this be available in the blue/gray.. light blue? color. Thanks.

It's possible. I have about a 1/2 dozen different Toyota grey colors in stock. Hopefully one will match. All 3 consoles I have used for mockup were the tan color. I should be able to track down a gray one at my local pick a part this week.

 

[bhicks22]

So I was trying to wrap up the double cup holder design for the 4x4 automatic console and came across some conflicting imagery. I need some help here. I'm seeing two different consoles for the 4x4 automatic for the 2nd Gen 4Runner. What years are the two consoles below from? I have been working off of the 1st one but realized there may be two versions I need.

 

[4Reak Show]

So I was trying to wrap up the double cup holder design for the 4x4 automatic console and came across some conflicting imagery. I need some help here. I'm seeing two different consoles for the 4x4 automatic for the 2nd Gen 4Runner. What years are the two consoles below from? I have been working off of the 1st one but realized there may be two versions I need.

My 95 4WD auto looked like the top pic before conversion, if that helps.

On another note, I'd kill for a set for 2nd gen 4WD Manual. Grey is best, any chance you'd do black? Thanks and good luck

 

[bhicks22]

My 95 4WD auto looked like the top pic before conversion, if that helps.

On another note, I'd kill for a set for 2nd gen 4WD Manual. Grey is best, any chance you'd do black? Thanks and good luck

I have a color match for the Tan but have not found a color match for the gray. If I can't find a gray color match then I will offer Tan and black. The 4WD manual trans cup holder is all done and a large batch already made. I will have pics of it installed tomorrow. Should be up on my website some time next week. I just need to wrap up the 4x4 auto double cup holder.

 

[bhicks22]

For those that don't go back a page here is my previous post. I need to know what year 2nd Gen the 2nd console (bottom pic) is from. My old 92 had the 1st console and from the earlier post a 95 had the same console so I'm very confused on where this console is from. So I was trying to wrap up the double cup holder design for the 4x4 automatic console and came across some conflicting imagery. I need some help here. I'm seeing two different consoles for the 4x4 automatic for the 2nd Gen 4Runner. What years are the two consoles below from? I have been working off of the 1st one but realized there may be two versions I need.

 

[bhicks22]

Maybe I should just ask a more specific question. Does anyone on this forum have the console in the 2nd pic above? If so, what year is it?

 

[Dropzone]

Maybe I should just ask a more specific question. Does anyone on this forum have the console in the 2nd pic above? If so, what year is it?

Pretty sure the bottom picture is out of a Toyota Surf (probably the philipines), though most are right hand drive...

 

[bhicks]

Pretty sure the bottom picture is out of a Toyota Surf (probably the philipines), though most are right hand drive...

Ok. I will just stick with the console that I have and hope that it covers all the US spec Auto 4x4 2nd Gens out there.