2nd Gen Cup Holders

I'm starting to go into production on these tomorrow. If you guys are interested in the double or single insert pictured above, just let me know so I have an idea on the size of the first batch.
 
These are awesome! Will definitely be purchasing one of these once my 2nd gen is running better


Sent from my iPhone using Tapatalk
 
We finally had a week where sales weren't crazy. We got the shop organized and cleaned and were able to restock all products. We also make a good sized batch of the new 2nd Gen console cup holders. They are now officially up on our website. The link is below. Once your on the site you will see a link at the top that lets you go to etsy if you need to have these shipped outside the country. We do all of our international shipping through etsy. Anything in the US can be ordered directly off the website.
2nd Gen 4Runner – BH3D Printing
 
Thanks for the orders guys. Only had a handful come in for the new cup holders but that's ok. I figured these would not be a huge seller. We will get the new orders and any more that come in today or tomorrow shipped out first thing on Monday.
Edit: Looks like this got bumped to the next page. Pics of the new cup holders for the 2nd Gen are on the previous page. Here's the link to the new cup holder product page:
2nd Gen 4Runner – BH3D Printing
 
The 2nd wave of new 2nd Gen cup holders shipped out yesterday. Thanks again for the support. Still have some left from the original batch but I will make more over the next few days to make sure I don't run out of stock.
 
Have not been on here in a while. Just wanted to say thanks to all the guys who purchased the new 2nd Gen cup holders. The double cup holder that goes inside the console only sold around a dozen, which is fine. The single insert cup holder sold over 50 so far. That one has been much more successful. Thanks again for the support of my little business.
 
bhicks22 said:
Have not been on here in a while. Just wanted to say thanks to all the guys who purchased the new 2nd Gen cup holders. The double cup holder that goes inside the console only sold around a dozen, which is fine. The single insert cup holder sold over 50 so far. That one has been much more successful. Thanks again for the support of my little business.
Click to expand...


Man. Fantastic work as always. I use my side of console dual one all the time. The dual center console is a tough one maybe because that the arm rest. Again, GREAT idea and design, but with the limited space, it's hard to sacrifice the arm rest.

That being said, I had a question about the single one for the center. Is there a way you (or maybe a buyer) could give me a dimension for the distance between the front of the cup holder and the front of the console housing?
Because I have some switches in that area and I'd hate to buy it and have interference issues

My console:

a8c1b741fc4758d09f13104b9ac908cd.jpg


Looks close based on Internet pictures...

again, GREAT work man. You're an asset to the 4Runner community.
 
4Reak Show said:
Man. Fantastic work as always. I use my side of console dual one all the time. The dual center console is a tough one maybe because that the arm rest. Again, GREAT idea and design, but with the limited space, it's hard to sacrifice the arm rest.

That being said, I had a question about the single one for the center. Is there a way you (or maybe a buyer) could give me a dimension for the distance between the front of the cup holder and the front of the console housing?
Because I have some switches in that area and I'd hate to buy it and have interference issues


looks close based on Internet pictures...

again, GREAT work man. You're an asset to the 4Runner community.
Click to expand...

Sorry for the delay on getting back to you. I'm not on this forum too often. The single cup holder that mounts in that wedge shaped square hole has an overhang coming out of the hole of .4" up front. I think I understand your question so see attached pics. Based on your pic it looks like it will be SUPER close to touching. Not sure if there is any wiggle room to slide that aftermarket switch bezel forward a hair.

Capture.jpg
 
Last edited:
I figured this thread should work for the annual black Friday questions. No reason to start a new thread. I have been flooded over the last couple days with folks asking if we are running a black Friday sale. The quick answer is we are not since our profit margin is razor thin as is BUT we are still running the usual 15% off discount for forum users on our website. We are no longer running that promo on ebay and etsy since their seller fees (especially etsy) went through the roof this year. A 15% off discount now on etsy and we loose money. Our website coupon code is "TEQ15". Our website is
BH3D Printing

If you prefer to order through Etsy then our link is below. For all international orders you have to order through Ebay or Etsy.
Finally Cup Holders for your Toyota by BH3DPrinting on Etsy

Our ebay page link is below:
www.ebay.com
Items for sale by bh3d-printing | eBay
Shop eBay for great deals from bh3d-printing!
www.ebay.com
 
Looks like it's time for another Black Friday update. Being Black Friday I'm getting flooded with emails asking if we are running "Black Friday Specials". Unfortunately we are not running a black Friday specific promo BUT our forum discount of 15% is still in effect until the 1st of January. Coupon code "TEQ15". Right now the promo only works on our own website BH3D Printing We had to cancel it on Etsy and Ebay. We have done everything in our power to fight inflation within our business and get as creative as possible to not have to increase prices and so far we have not done that. The good news is that we have not increased our pricing this year. The bad news is this inflation is a loosing battle on our end. We will be forced to increase prices around 10-15% as of January 1st 2022. Here is the link to our site, etsy page, and ebay product page.

BH3D Printing

Finally Cup Holders for your Toyota by BH3DPrinting on Etsy

https://www.ebay.com/sch/bh3d-print...MKsAAOSwaTVZyGbS&rt=nc&_trksid=p2047675.l2562
 
What a rad upgrade to the center console. I finally need to fix the rear window switch. It will go up, but won't go down from the switch. If I take things apart, and had planned on adding in some lights, this may be a great addition.
 
cup holder

Late to the party, will these work on 1993 rhd hilux surf? Basically can I reverse it and put it on the left side?
thanks Josh
 
So it's that time of year again when Black Friday is right around the corner and once again I'm getting flooded with emails/messages asking if we are running any big Black Friday promos. With the cost of manufacturing continuing to go up at an alarming rate and inflation kicking my teeth in, we don't have the wiggle room for big promos. With that being said, we are still running our forum discount of 15% and free shipping by using coupon code "TEQ15" at checkout. We had to cancel that promo on Etsy and Ebay because their seller fees WITH a promo meant we made zero profit. The alternative is to raise our prices but we are stubbornly trying to avoid that if possible. The promo does work on our website since we don't charge ourselves fees. Here is a link to the 2nd Gen 4Runner cup holders.
2nd Gen 4Runner – BH3D Printing
View 2nd Gen 4Runner by BH3DPrinting on Etsy


<img src="https://i.ibb.co/2dtzpSF/P1000034.jpg" alt="P1000034" border="0" />
<img src="https://i.ibb.co/NCxSZ6k/2.jpg" alt="2" border="0" />
<img src="https://i.ibb.co/zbYFtZX/1.jpg" alt="1" border="0" />
 
4RunnerSafari said:
[MENTION=89792]bhicks[/MENTION] Is Shipping to Norway/Europe possible or only US? Nice products.

Sent fra min WAS-LX1 via Tapatalk
Click to expand...

We ship to European nations daily. We don't do international shipping through our website but we do offer it on our Etsy and Ebay store.

View 2nd Gen 4Runner by BH3DPrinting on Etsy

1990-1995 Toyota 4Runner Double Cup Holder (2nd gen) | eBay
1990-1995 Toyota 4Runner Double Cup Holder Insert (2nd Gen) | eBay
1990-1995 Toyota 4Runner Single Cup Holder Insert (2nd Gen) | eBay
 
Apparently folks didn't read my earlier post about a Black Friday promo. I had 100s of email this morning when I got into the shop asking about any promos today. The only promo we are running right now is 15% off the entire order plus free shipping. Use coupon code "TEQ15" during checkout. We are not running the 15% off promo on etsy or ebay because of all their seller fees. This promo is only available on our website. BH3D Printing
 
You must log in or register to reply here.

Similar threads

F
Fadiddy's 2TR-FE Turbo Swap 2nd Gen Build
Replies
17
Views
14K
MartennSie
M
cyclingtrav
Doug Thorley Shortie Headers 4.7L V8 - My Experience w/ Install & CA Smog
Replies
12
Views
8K
cyclingtrav
cyclingtrav
cyclingtrav
SAIS Check Valve Replacement 2008 4Runner 4.7L V8: Words of Warning!
Replies
5
Views
5K
cyclingtrav
cyclingtrav
M
Need to buy these connectors to make my Lights work.. Don't know what they are.
Replies
4
Views
2K
fkheath
F
BullRNR
Bent rear lower shock mounts!
Replies
1
Views
2K
spartacus
spartacus

Members online

Total: 300 (members: 3, guests: 297)

Forum statistics

Threads
278,310
Messages
3,554,080
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top