3/2 cornfed lift

[TechRunner06]

New to the 4 runner world, as of yesterday. Looking into cornfed 3/2 lift. Are there any other necessary modifications to install lift?

 

[fourwd1]

Welcome to T4R.
Tell us a little more about your truck, like what year for starters.

 

[TechRunner06]

Welcome to T4R.
Tell us a little more about your truck, like what year for starters.

It's a 2006 v8 4wd sr5.

 

[zopperman]

New to the 4 runner world, as of yesterday. Looking into cornfed 3/2 lift. Are there any other necessary modifications to install lift?

Moved to the 4th gen section for you.

What do you mean by other modifications?

Are you planning bigger tires or wheel spacers or anything?

 

[TechRunner06]

Thanks zopperman! And eventually bigger tires but not now. I was just wondering if I have to do anything else other than just put the kit on.

 

[hearno]

No, would be the answer to your question. Depending on your skills and resources, it's a three hour job.

 

[97hb]

Had my Cornfed 3/2 on since about 50k miles no problem. Easy to install but you need spring compressor for the fronts, rent from auto zone. Backs are super easy less than 10 min to install.

 

[gaterose]

It's easier and safer to do the install the compressor-less way- by placing a jack under the LCA removing the top nut on the strut, then removing the 2 LBJ bolts and slowly letting the jack down. - OME Install - no spring compressor - Toyota 120 Platforms Forum

This method doesn't require the use of the sometimes sketchy rental compressors and is also quicker without air tools.