+3.5 Long Travel Designs and Plans!!

[RockyrT4R]

If you are interested in building your own long travel suspension you have come to the right place!!

I am providing 3rd Gen 4Runner and 1st Gen Tacoma owners who have fabrication experience or someone who can build it for them plans and designs.


These Plans Include:
-DXF Cut Files for Flat Parts
-Dimensioned and Labeled Part Diagrams
-Parts List, Includes all necessary part numbers, details and specifications for necessary components.
-Build Order of Operations
-And More!

Benefits of this Long Travel setup:
-NO MORE LOWER BALL JOINT FAILURES!
-13” of travel achievable without CV modification.
-All joints are Uni-Ball Joints, which are much stronger than a conventional ball joint.
-Heavy Duty Hiem Joint Steering Linkage

-Works with:
96-02 4Runner 2wd/4wd
95-04 Tacoma 4wd

**These plans are for experienced fabricators**
-If you are not comfortable fabricating, it is highly suggested that you take this kit to a professional fabrication shop.

The Designs, Cut Files, Dimensioned and Labeled Part layouts, Parts list w/ references and build instructions are all included for the price of $200.
These are still in the development phase but most of the large issues have been worked out.
DM me to inquire about more information or purchasing your plans!

Here's a picture I grabbed a little while back!
(In the picture I was running Tundra Bilstien 5100s but I have switched to 2.5x8" Coilovers with Reservoirs now.)

 

[OU4x4]

without giving away state secrets...how do you get long travel with no CV mods?
other kits require longer CVs

 

[Nate_GB]

without giving away state secrets...how do you get long travel with no CV mods?
other kits require longer CVs

It uses tundra axles.

 

[ragingbull2k2]

without giving away state secrets...how do you get long travel with no CV mods?

other kits require longer CVs

Probably meant stock tundra axles.

Sent from my SM-G975U using Tapatalk

 

[RockyrT4R]

without giving away state secrets...how do you get long travel with no CV mods?
other kits require longer CVs

Yes this uses 1st gen tundra cv axles, it is a direct fit and they are 3.5” longer so they are perfect for this length of long travel!

 

[Quantumkiwi]

Interesting. Most LT kits are way out of my budget, but I could probably borrow a TIG welder long enough to make these.
How to these compare engineering-wise to other LT kits? Would there be any differences in caster/camber/toe? Will these hold up (especially with the BJs and heims) to being on a DD?
Can you use a standard 3rd gen suspension setup?

I'd definitely be interested in these if a few more people put road time on them.

 

[Autozone Special]

Can you post a picture of the suspension setup to see how you kit looks and I'm wondering if this is still avaliable?

 

[rics97toy]

I am interested in the long travel plans if they are still available

 

[04rnr]

Id like to see the front,, flex as the rear can flex pretty good already

 

[TACOMARHOADS99]

How do we go about getting this file?

 

[Bad Luck]

If you are interested in building your own long travel suspension you have come to the right place!!

I am providing 3rd Gen 4Runner and 1st Gen Tacoma owners who have fabrication experience or someone who can build it for them plans and designs.


These Plans Include:
-DXF Cut Files for Flat Parts
-Dimensioned and Labeled Part Diagrams
-Parts List, Includes all necessary part numbers, details and specifications for necessary components.
-Build Order of Operations
-And More!

Benefits of this Long Travel setup:
-NO MORE LOWER BALL JOINT FAILURES!
-13” of travel achievable without CV modification.
-All joints are Uni-Ball Joints, which are much stronger than a conventional ball joint.
-Heavy Duty Hiem Joint Steering Linkage

-Works with:
96-02 4Runner 2wd/4wd
95-04 Tacoma 4wd

**These plans are for experienced fabricators**
-If you are not comfortable fabricating, it is highly suggested that you take this kit to a professional fabrication shop.

The Designs, Cut Files, Dimensioned and Labeled Part layouts, Parts list w/ references and build instructions are all included for the price of $200.
These are still in the development phase but most of the large issues have been worked out.
DM me to inquire about more information or purchasing your plans!

Here's a picture I grabbed a little while back!
(In the picture I was running Tundra Bilstien 5100s but I have switched to 2.5x8" Coilovers with Reservoirs now.)

How do we go about getting this file?

At the risk of sounding like an ass, did you read the first post? I marked the important part for you.

 

[Devbot]

I would kill for an LT set up but I just can't bring myself to deal with squeaky uniballs :brick:

 

[MarkamisPrime]

I would kill for an LT set up but I just can't bring myself to deal with squeaky uniballs :brick:

I’ve had my uniball UCAs for 5 years now
Minimal to no maintenance
No play
No squeaks

Has anyone put any real road miles on these kits. ?
I follow this build on ig and it’s at a stand still for now.

 

[[email protected]]

How can I buy them?

I'm interested in buying the files

 

[994runnerluke]

I’d like to buy your plans for $200 would you please email me at [email protected] or text at 916-4l7- 35 nine nine. Or get back to me here.