3rd gen 4Runner Skid Plates *Best Pricing*

[isu2014]

CANCELED!
CANCELED!
CANCELED!
CANCELED!





Ryno All Terrain Products is at it again.... I am offering a group discount on my skid plates for 1st gen Tacomas and 3rd gen 4Runners. I will run this group buy until January 31st. A $250 deposit is due by January 31st. The rest can be paid when the order is ready to ship. I'm starting this early in hopes that everyone has time to see this and gather funds.


RACK COVERAGE SKID $225: Included in purchase is an extended IFS skid plate that covers the steering rack and all necessary hardware to install to factory mounting location.
Weights:
1/8" = 42 pounds
3/16" = 60 pounds

3 PIECE SET $400: Included in purchase are IFS, transmission, transfer case skids, and all necessary hardware to install. Drilling is required.
Weights:
1/8" = 85 pounds
3/16" = 120 pounds

4RUNNER FUEL TANK SKID: Will be here before this closes.

Details:
3/16" or 1/8" high strength cold rolled steel (stronger than hot rolled other vendors use)
40-60 pounds per piece
Uses factory mounting holes are used except on transfer case skid
Cutout for engine oil drain plug included on all skids
Replaces both factory skid plates
Works with front differential drops - no spacers needed
Not painted or powdered - $75-150 extra for black powder coat

Manufacturing time is about 4 weeks from when I order. I will ship when the order is complete.

Shipping will be fedex ground. Pay by paypal, cash, or check.

PM for shipping quotes...
For rough shipping cost estimates on a 3 piece set:
Colorado: $80
California: $100
Massachusetts: $95
Florida: $95
Texas: $80
Kentucky: $80

Email me at [email protected] if you don't have an account here but want skids.



3 PIECE SET

































RACK COVERAGE SKID

Previous sale threads with more info and whatnot:
RAT Products Skid Plates - 1st gen Tacoma, 3rd gen T4R - Tacoma World Forums
Skid plates from RAT Products - 1st gen - Tacoma World Forums

3 piece skid installation instructions:
RAT Products Skid Plate Install Write up - Tacoma World Forums





The List:
1. (tw) muay_thaierd - 3/16" rack cover
2. (t4r) clemson4r - 3/16" full set
3. (tw) Robmonster117 - 3/16" full set
4. (tw) Penten - full set
5.
6.
7.

 

[kolelt]

I'm interested in the tranny/tcase combo only. I have your front skid from last group buy. Would the tranny/tcase fit to the front skid plate that I already have ? I PMed you !!

 

[clemson4r]

Count me in for a full set (3piece) in 3/16"
Max

 

[dirteater4]

rhino

Dang it! I wish that I waited on this sweet deal. It was hard to pass up the texas state wildcat front skid I got from you on ebay. I love it by the way. How much for just the center diff skid?

 

[4eigner]

Shipping discounts on multiple orders to 1 location?

 

[NJCatalana]

Ryan is a nice guy who makes great quality skids! I've had mine on for about a year now and they've held up just fine! I highly recommend getting these-you won't find a better price on a full set of skids elsewhere :thumb3:

 

[TheArkMaster]

Is there a price difference for the 1/8" vs 3/16" for the 3 piece set, or is it just $400 either way?

EDIT: Also, is the extended rack coverage offered in this?

 

[clemson4r]

Is there a price difference for the 1/8" vs 3/16" for the 3 piece set, or is it just $400 either way?

EDIT: Also, is the extended rack coverage offered in this?

I would also like to know this

Max

 

[isu2014]

I'm interested in the tranny/tcase combo only. I have your front skid from last group buy. Would the tranny/tcase fit to the front skid plate that I already have ? I PMed you !!

If you have the rack coverage skid, you would have to cut off the back rack coverage flange. The extra 2 pieces would be $267.

Dang it! I wish that I waited on this sweet deal. It was hard to pass up the texas state wildcat front skid I got from you on ebay. I love it by the way. How much for just the center diff skid?

The transmission skid alone would be $134 and would bolt up to that skid. I'm not offering custom cutouts this time, so you got lucky you got one!

Shipping discounts on multiple orders to 1 location?

I would use fastenal, so as long as you have a local fastenal you can pick the skids up at, total would probably be $150ish for 2+ sets. They go off a flat rate no matter how many sets I pile on the pallet.

Ryan is a nice guy who makes great quality skids! I've had mine on for about a year now and they've held up just fine! I highly recommend getting these-you won't find a better price on a full set of skids elsewhere :thumb3:

Thanks Nick! I'm working on the gas tank skid right now if you're interested!

Is there a price difference for the 1/8" vs 3/16" for the 3 piece set, or is it just $400 either way?

EDIT: Also, is the extended rack coverage offered in this?

No price difference for either. The rack coverage skid is $225 plus shipping.

 

[NJCatalana]

Thanks Nick! I'm working on the gas tank skid right now if you're interested!

I am definitely interested in that, can't wait to see what you've done with it

 

[RussToy]

Subscribe...I'll sign up on the first! Great deal!!

 

[isu2014]

 

[isu2014]

Updated the List:
1. (tw) muay_thaierd - 3/16" rack cover
2. (t4r) clemson4r - 3/16" full set
3. (tw) Robmonster117 - 3/16" full set
4. (tw) Penten - full set
5.
6.
7.

 

[Lego3k1]

Pending for a full set and gas tank skid.

 

[TheGis810]

I'm in for a full set (3/16") plus a gas tank skid (T4R). No custom cutouts this time?

 

[NJCatalana]

I'll be on the list once the details about the gas tank skid are released

 

[st8rocks]

[MENTION=101896]isu2014[/MENTION]. Can you expand on the drilling required.

 

[isu2014]

Unfortunately I'm going to have to cancel this group buy. I'm moving out of state for a new job so I won't be able to fulfill the orders. I'm not sure if there will ever be another group buy in the future due to lack of time.

 

[NJCatalana]

Unfortunately I'm going to have to cancel this group buy. I'm moving out of state for a new job so I won't be able to fulfill the orders. I'm not sure if there will ever be another group buy in the future due to lack of time.

ah bummer man! Where ya headed? good luck, I hope it all goes well for you

 

[isu2014]

ah bummer man! Where ya headed? good luck, I hope it all goes well for you

Thanks! I'm heading back to the motherland, Minnesota. I'm done with school so I have no ties to Iowa and all my family and good engineering jobs are in Minnesota.