3rd Gen Axle Weight

[Nicely]

Hope someone can help me here

I've got a 3rd Gen JDM Hilux Surf, which is essentially the same as your 4Runners. The truck was imported into the UK before I bought it and I drove it over to Finland last year (where I now live). I'm in the process of getting it registered and everything is fine except that it is a requirement to show the front and rear axle weights on the registration document. Maybe they check the weights too; I'm not sure.

Anyway, I've been searching everywhere for these figures without success. The kerb weight and max load weight figures are readily available, but not axle weights.

Does anyone have these figures? I realise that there will be variations on the models, but I doubt this is too much of a problem. The inspection people used a 4Runner kerb weight taken off some web site instead of the model specific figure I had!

BTW, it's a 3.4 V6.

 

[024RunnerSE]

I'll try to get some axle weights today.

 

[Nicely]

I appreciate that

 

[JohnsD90]

I appreciate that

You have 3.4l Hilux surf, so RHD and Gas, thats an interesting combo, i hope its stick.

 

[Nicely]

OK, a friend in the US has been speaking to a very helpful dealer to try to find these figures. However, they can't get anything accurate without a US VIN. Can someone with a 3rd Gen 3.4 V6 please let me have their VIN? PM me if you'd rather not list it publically

You have 3.4l Hilux surf, so RHD and Gas, thats an interesting combo, i hope its stick.

No, they only did autos on that engine, I believe.

 

[Pikeman]

Well the door decall. GVWR= 5250 GAWR front=2650 GAWR Rear=3000 if you need empty wieghts as rolling down the road then maybe can try a truck stop weight scale and get Empty axle weights.

 

[024RunnerSE]

Sorry I'm late. Completely forgot all about it but I hope I aint late. Heres the axle and combined weight of my 4Runner with no people in it, a 50lb brushgaurd on the front and about half a tank of fuel.