oriojasjr
New member
***PRICE DROPS 2/18/2012***
3RD Gen 4Runner Taillights w/ all wires/bulbs
Up for grabs are a clean pair of taillights from my ’98 Toyota 4Runner Limited. I’ve tried to capture some photos up close to clearly indicate the excellent condition of the lights. They were protected with rear taillight guards at one point, but I’ve replaced them with some LED taillights and have no need for these. The wiring harness AND bulbs are included with the sale, and all bulbs fully functional. I had to modify the LH taillight a bit to fit the taillight guards (as seen in photo of the underside of lights), but this is nothing that affects the integrity of the light itself.
First $100 gets them.
**SHIIPPING is on your dime**
Running boards- good condition, free of dents or holes. They have minor scratches as you would expect from a now 14 year old vehicle, and the driver’s side had some slight flaking towards the front tire area- happened at a drive-thru car wash (guess the jet streams were too powerful?). As seen in the photo, nuts & bolts included, the rubber is intact, and because of the size, I’d prefer local sale. I travel to San Antonio & Austin on occasion, so could maybe meet buyer. Shipping would be on YOUR dime, as would the boxes for these big boys. $100 takes them away!!
Factory hatch lift shocks, used, BUT not entirely worthless as they still raise the hatch up to a good height, but then need a bit of assistance for the final lift. I stand 6’ and they raise about 5.5’ before I need to lift it all the way. My wife is 5’6 and has no problem when loading/unloading groceries, I just didn’t like that I had to finish lifting them--- yes, I am spoiled. >= ( Anyhow, they would still work for someone on a budget, or those that use a stick (or the similar) to keep the hatch raised. $10---Shipping on your dime….
*****SOLD*****Center console armrest in tan from a ’98 Toyota 4Runner. Still in great condition with no tears or scratches. Removed as replaced with leather cushion armrest. Pics of underside included to assure working condition- screws not included.
3RD Gen 4Runner Taillights w/ all wires/bulbs
Up for grabs are a clean pair of taillights from my ’98 Toyota 4Runner Limited. I’ve tried to capture some photos up close to clearly indicate the excellent condition of the lights. They were protected with rear taillight guards at one point, but I’ve replaced them with some LED taillights and have no need for these. The wiring harness AND bulbs are included with the sale, and all bulbs fully functional. I had to modify the LH taillight a bit to fit the taillight guards (as seen in photo of the underside of lights), but this is nothing that affects the integrity of the light itself.
First $100 gets them.
**SHIIPPING is on your dime**
Running boards- good condition, free of dents or holes. They have minor scratches as you would expect from a now 14 year old vehicle, and the driver’s side had some slight flaking towards the front tire area- happened at a drive-thru car wash (guess the jet streams were too powerful?). As seen in the photo, nuts & bolts included, the rubber is intact, and because of the size, I’d prefer local sale. I travel to San Antonio & Austin on occasion, so could maybe meet buyer. Shipping would be on YOUR dime, as would the boxes for these big boys. $100 takes them away!!
Factory hatch lift shocks, used, BUT not entirely worthless as they still raise the hatch up to a good height, but then need a bit of assistance for the final lift. I stand 6’ and they raise about 5.5’ before I need to lift it all the way. My wife is 5’6 and has no problem when loading/unloading groceries, I just didn’t like that I had to finish lifting them--- yes, I am spoiled. >= ( Anyhow, they would still work for someone on a budget, or those that use a stick (or the similar) to keep the hatch raised. $10---Shipping on your dime….
*****SOLD*****Center console armrest in tan from a ’98 Toyota 4Runner. Still in great condition with no tears or scratches. Removed as replaced with leather cushion armrest. Pics of underside included to assure working condition- screws not included.
Last edited:
