Using OME 890 with 10mm trim packers at the moment so a bit over 3" rear lift. I'd like to put 5160 on but I think the 3rd gen ones are probably going to be too short? Don't care too much about flex this is mostly for dirt roads and stuff.
3rd gen (25-268362 / 25-268379)
Lift: 0-2.5
Collapsed Length (IN) - 12.91
Extended Length (IN) - 20.66
Upper Mount Type - Stem
Lower Mount Type - Eye 19mm
4th gen/FJ:
25-227611
Collapsed Length (IN) - 14.83
Extended Length (IN) - 23.5
Upper Mount Type - Stem
Lower Mount Type - 19mm
BTW when googling these I saw you can buy them from Home Depot lol. https://www.homedepot.com/p/Bilstei...ner-07-14-FJ-Cruiser-Rear-25-227611/306616248
3rd gen (25-268362 / 25-268379)
Lift: 0-2.5
Collapsed Length (IN) - 12.91
Extended Length (IN) - 20.66
Upper Mount Type - Stem
Lower Mount Type - Eye 19mm
4th gen/FJ:
25-227611
Collapsed Length (IN) - 14.83
Extended Length (IN) - 23.5
Upper Mount Type - Stem
Lower Mount Type - 19mm
BTW when googling these I saw you can buy them from Home Depot lol. https://www.homedepot.com/p/Bilstei...ner-07-14-FJ-Cruiser-Rear-25-227611/306616248
