4Runners are much more practical and easier to fix when broken
I'm a Jeep fan too - to an extent. From an off road standpoint, nothing from the factory compares to the ability of a Rubicon. To get a Toyota just to that point (SAS w/ HD axles, dual selectable lockers, geared-down t-case, and roll cage) would cost thousands just to match the ability of a stock Rubi. But from a reliability standpoint (if it's a DD also), I'd take a 15 year old Toyota before I'd take a 5 year old Jeep.
Subjective and also correct at the same time. For me, there is something very raw, very pure, very indescribable wheeling my Jeep. You see, I have zero power steering, heck I don't even have disk brakes, drums all around. I have to shift two sticks, one for the tranny, one for the overdrive unit. It's kinda cool having six forward gears and two reverse gears. Even the carb acts up on the Rubicon which requires a little throttle management. Is that black 4Runner more capable, oh m'in f'in A it is!!
I'm running D44s with 4:88 gears and locked front and rear. So practical, not in any way shape or form. But, that's kinda the point isn't it?
I promise you sometimes I don't take the hardest lines. That's a VERY clean 1969 Kaiser CJ5 with 65K original miles on the chassis and about 8K on the entire drivetrain. I use it, abuse it a bit, but I don't kill it. Kinda like using a classic, but not destroying it. I've been offered 12K for it, but it ain't for sale, ever. It's one of those things that don't carry a price. Bought it in 1981 with my grandfather and dad. They are both gone now. Ah, memories. :hatsoff:
We are all out there wheeling, sharing trails, and having a good time. I've been rescued, come to the rescue, made fun of others, been made fun of. Rant off.
Ok, i have to comment on this one. Bring your infamous Jeep Rubicon to my house and I can prove to you that there are more off road capable stock Toyotas out there. I have everything you listed minus the roll cage. Oh ya, i do have 3 rows of leather seats, stronger HD axles, and nice road manners too.
Ok, now back on topic. Even when I buy new, there is one thing I like to do. If you are looking at a low mileage 2008 4Runner and a low mileage 2008 Jeep GC, then go try out a high mileage (100k or more) 2003 or 2004 of both types. That will be a good indication on how well they will hold up. Just because you may not HAVE to fix anything, doesn't mean it will ride like a new one. I have always been impressed in how well a high mileage Toyota rides. Less bumps, rattles, and squeaks then most low mileage American cars. But hey, what do I know, my truck only has 182,000 miles on it.
J
So, your STOCK Toyotas have 32" bfg mt, 4:1 transfer case, full lockers on both axles, RTI of over 800, and dana 44-hybrid axles?? And btw dana 44 is stronger than most toyota axles in midsize SUVs.
So, your STOCK Toyotas have 32" bfg mt, 4:1 transfer case, full lockers on both axles, RTI of over 800, and dana 44-hybrid axles?? And btw dana 44 is stronger than most toyota axles in midsize SUVs.
Your right, I concede. They do have better tires. :hatsoff: But who keeps stock tires anyways? Now if we are talking about something made in the last 10 years or something that is intended for the US market, then Yes, you are once again correct. But I still think (tires being equal) I could more than hold my own against a Jeep Rubicon.
My axles are a hell of alot more than 1000$ each. My rear is a ford 9" with Arb, 4.88's, wilwood disc brakes, and 35 spline custom axles.... With the housing.... That thing is pushin 5k and the front is prob close to 3500$ with arb and land cruiser 80 series hubs... Not to mention the marlin crawler transfer case with 4.7:1 crawl...My truck is wayyyy over the top. But my point was that enough money And you can turn a newer model Toyota into a rock crAwler/ DD... In all honesty... My best friend has a rubicon with a 6" rubicon express lift on 37's. It is by FAR, the best wheeler out of the box. If I knew then what i knew now, i probably wouldnt have gotten the runner...if i had to do it again, I would have went with the rubicon. Is comes with Fr and rr lockers and a swaybar disco... And not to mention the straight axles. I got into wheeling after A year of having the truck. The jeep rubicon 4door is just the best platform to start with... U can buy everything in a kit. Just my opinion. But I do love my truck!
I saw a lowered Jeep Rubicon on the strip early yesterday. It appeared to have at least 22 inch rims and anything that could be replaced with chrome, replaced. Incidentally, the i in Rubicon was scrubbed and replaced with a fancy Y. Yes the Jeep was red. Trail Ready baby!! RubYcon WTW!
:trophy: So Gay
Ha ha ha!
My axles are a hell of alot more than 1000$ each. My rear is a ford 9" with Arb, 4.88's, wilwood disc brakes, and 35 spline custom axles.... With the housing.... That thing is pushin 5k and the front is prob close to 3500$ with arb and land cruiser 80 series hubs... Not to mention the marlin crawler transfer case with 4.7:1 crawl...My truck is wayyyy over the top. But my point was that enough money And you can turn a newer model Toyota into a rock crAwler/ DD... In all honesty... My best friend has a rubicon with a 6" rubicon express lift on 37's. It is by FAR, the best wheeler out of the box. If I knew then what i knew now, i probably wouldnt have gotten the runner...if i had to do it again, I would have went with the rubicon. Is comes with Fr and rr lockers and a swaybar disco... And not to mention the straight axles. I got into wheeling after A year of having the truck. The jeep rubicon 4door is just the best platform to start with... U can buy everything in a kit. Just my opinion. But I do love my truck!
So, are you saying that you've never seen a pimped out 4runner nor GX470? I would bet that the Rubycon that you saw can still hang with your GX off-road....
What vehicle do you have? Why keep us guessing?
Now, you may say that a TLC80 with locked axles may be competitive, but what was the original MSRP (in today's money)?