4th Gen Helpful DIY Videos

[Stuck CAPS]

bump for sticky

I agree, this would be a great sticky!

another vote to sticky this!

I was hoping it'd get stickied, because I've needed videos more than explanations of how to do things, as I'm a visual learner. Just hoped that this would be helpful for others, as well as myself (Sort of a... not-so-personal personal list of videos). Remember, though, if you guys find more videos, post them on here, so I can add them to the list.

 

[Bob J]

Another Vote for this to be a sticky....

These vids were very helpful when we replaced the timing belt in my sons runner (V8)....

https://www.youtube.com/watch?v=6TZTn1Arjho
https://www.youtube.com/watch?v=fM1A0DWhRHc
https://www.youtube.com/watch?v=r0pkzk395y0

 

[DaveK22]

Possibly another one for the suspension. Shows a leveling kit install on front...may be useful for Daystar, Conrfed, etc. too.

Velocity Off-Road Tacoma 4Runner / Tacoma / FJ Install - YouTube

 

[Stuck CAPS]

Another Vote for this to be a sticky....

These vids were very helpful when we replaced the timing belt in my sons runner (V8)....

https://www.youtube.com/watch?v=6TZTn1Arjho
https://www.youtube.com/watch?v=fM1A0DWhRHc
https://www.youtube.com/watch?v=r0pkzk395y0

Added. Very helpful videos, too!

Possibly another one for the suspension. Shows a leveling kit install on front...may be useful for Daystar, Conrfed, etc. too.

Velocity Off-Road Tacoma 4Runner / Tacoma / FJ Install - YouTube

That video made the install look very easy to do! Thanks. Added.

 

[Stuck CAPS]

Added quite a few new videos.

 

[RollAwayTheDew]

bump for sticky

 

[Bob J]

Another vote for this being a sticky....:thumb:

 

[Stuck CAPS]

Just wanted to bump because I see quite a few people asking questions which I have videos listed of in here.

 

[JET4]

to the top for a sticky

 

[BuckRunner]

+1 Sticky.

Nice Thread.

 

[Ohcrymore]

Anyone know if you need to do an alignment when swapping out a bent rear LCA for a straight one?
Thanks!

 

[Nathana92]

Anyone know if you need to do an alignment when swapping out a bent rear LCA for a straight one?

Thanks!

Yes you'll need an alignment due to the alignment cams being removed and reinstalled.

 

[Ohcrymore]

Yes you'll need an alignment due to the alignment cams being removed and reinstalled.

For the rear? Even though the links are the same length?

 

[Nathana92]

For the rear? Even though the links are the same length?

Sorry I read LCA as the front as the rear is often referred to as a lower link. No if you replace with a stock length there isn't a need for a 4wheel alignment.

 

[preacher35]

I know that this has probably been asked, but why on Earth is this thread not stickied?

 

[Ppilar]

This thread is perfect! Needs to be stickied!!

 

[Hayden_]

Great thread I vote a stickie

 

[poncharello]

So I count 15 (including me) people asking to make this thread a sticky,what gives?

Stickeeeeeeeeey!

 

[Brutalguyracing]

I vote sticky dam it

 

[dgwood12]

+1 for sticky