4th wheel well liners template questions

[Net4n6]

Where can I get the template for 4gen wheel well liners? Mine are totally ripped. Mine 4runner has body lift so I have to edit the template to fit the lift. Stock one does not have enough slack and will get ripped again.

Thank you.

 

[Net4n6]

I found this post

http://www.toyota-4runner.org/4th-gen-t4rs/95901-fender-liner-part-number-s.html

but I am still looking for the template.

 

[having fun]

I found this post

http://www.toyota-4runner.org/4th-gen-t4rs/95901-fender-liner-part-number-s.html

but I am still looking for the template.

I had some scrap rubber and had to use my disinerated pieces for a pattern. You might want to pull what's left of yours while you can make a pattern from them.

 

[Net4n6]

I found the tread and PMed 4WDFTW

http://www.toyota-4runner.org/4th-gen-t4rs/95901-fender-liner-part-number-s-4.html

 

[Net4n6]

I had some scrap rubber and had to use my disinerated pieces for a pattern. You might want to pull what's left of yours while you can make a pattern from them.

Mine is totally gone. Nothing left.

 

[having fun]

Missing the other side also?
Find another runner and pull it off and make a template, and reinstall it.

If all fails, find a tweeker, he'll get you a set.

 

[V8Man]

I found this post

http://www.toyota-4runner.org/4th-gen-t4rs/95901-fender-liner-part-number-s.html

but I am still looking for the template.

I have a PDF scan of them. The rears are the same for both sides the fronts are different. Pm me your email and I will send them to you. You will need an 11 x 17 printer.

 

[2014 Warthog]

I believe that there is a company with the amusing name of "Lift Lips" that creates lifted truck gap liners. But yeah, if you can find the material somewhere, just use some cardboard or an old sheet and make your own template