KidVermicious
New member
I like the new stance a lot better. Lookin' good!
Addicted's 96' 4runner using TG Tacoma SAS kit
- Thread starter AddictedOffroad
- Start date
AddictedOffroad
New member
Just under 26". I think its around 25-3/4"
JayRolla
New member
Any good turbo setup will smoke any supercharger thats made for our motors. Love seeing a precision turbo under that hood, I never ran one, always ran holset, mitsubish, garrett turbos as precisions are known to fail at high boost levels but guessin you dont need to push that much boost to make that 320hp.
I love this setup, its exactly what I want to do just never had the ability to make a custom turbo manifold. If you guys will sell the manifold alone I would be game to buy. I want to run an hx35 holset t3 housing with larger injectors, fuel pump, e85, wbo2, NO intercooler (e85 wont need it) knock sensor and aem ems or megasquirt for tuning. Im going to shoot for a very high timing curve with a good rich AFR. I plan on pushing the stock motor pretty far and with e85 you can make crazy power safely. But this is all after I get another car to drive, this is my DD right now.
Cant wait to see the dyno. If you guys are on pump gas, it would be awesome to see what e85 would do also if you have the fuel setup to keep up.
I love this setup, its exactly what I want to do just never had the ability to make a custom turbo manifold. If you guys will sell the manifold alone I would be game to buy. I want to run an hx35 holset t3 housing with larger injectors, fuel pump, e85, wbo2, NO intercooler (e85 wont need it) knock sensor and aem ems or megasquirt for tuning. Im going to shoot for a very high timing curve with a good rich AFR. I plan on pushing the stock motor pretty far and with e85 you can make crazy power safely. But this is all after I get another car to drive, this is my DD right now.
Cant wait to see the dyno. If you guys are on pump gas, it would be awesome to see what e85 would do also if you have the fuel setup to keep up.
AddictedOffroad
New member
Glade has a 750hp Honda Prelude that runs on E85 with all the bells and whistles in it. This should be cake for him.
steezemcqueen
Moderator
Looks sweet. It is running off just the passenger side manifold?
AddictedOffroad
New member
No, both manifolds. We built a custom crossover tube and both manifolds from scratch.
Last edited:
alaskaflyer
New member
Spare tire carrier!
Is this a direct bolt on option for your 3rd gen bumper?
Just watched the video again and answered my own question, what I would like to know is, is this bumper with tire carrier available for purchase for a 3rd gen?
Thanks
Is this a direct bolt on option for your 3rd gen bumper?
Just watched the video again and answered my own question, what I would like to know is, is this bumper with tire carrier available for purchase for a 3rd gen?
Thanks
Last edited:
AddictedOffroad
New member
No, we have to build tire carriers in house on the rig itself.
alaskaflyer
New member
Ok, well when I get transferred next summer I will have to plan a trip through your area and get this done. Coolest bumper I've seen in a while. I've had swing outs before and couldn't stand how unstable they felt.
One last question, if I buy your rear bumper is this something you can add later.
Thanks for your time
Gary
AddictedOffroad
New member
Sort of. We have to make a provision to leave room for the spindle assembly and latch. So, if you order it like that, we need to know for sure that you are adding a carrier later.
alaskaflyer
New member
JayRolla
New member
Damn that is badass, talk about tire spin!!. Cant wait to see the dyno results.
TraumaHawk
Member
EPIC....enjoyed the build thread. Thanks for sharing.
AddictedOffroad
New member
Well it sucks that Steve Jobs died before you finished his 4runner
That thing sure looks like a costly project.
That is funny actually. This is one of my employees' 4runners. He's been building it for a year. He sold his Tacoma, bought this 4runner cheap, and invested the difference.
JWaldz
Moderator
Sounds like a nice investment! This thing looks like it's a dream to drive. Looking forward to seeing it out on some trails.
BigFishAllDay
New member
I will never look at my engine bay the same way I did before I saw this picture. Ever. That looks like something you'd see on a Supra forum.
Absolutely Nuts! This thing is like a modernized, hopped up version of the '85s with solid axles and 22RE's.
You guys never fail to impress.
Absolutely Nuts! This thing is like a modernized, hopped up version of the '85s with solid axles and 22RE's.
You guys never fail to impress.
3.4L Turbo'd
