Magnetic
New member
Is this correct place to buy Arclight Booster: Triple State Voltage Booster - 5th Gen 4Runner — ArcLightLEDs
Shows as "Sold Out" on their website... :shrug:
Is this correct place to buy Arclight Booster: Triple State Voltage Booster - 5th Gen 4Runner — ArcLightLEDs
Shows as "Sold Out" on their website... :shrug:
No. Diode replaces a fuse and offers no protection to that circuit.
The diode is rated at 1 amp vs the stock fuse (7.5a)
I ended up removing the diode ansrer taking some readings at cold start, driving and idling after warmed up
Posted in my build thread:
https://www.toyota-4runner.org/3rd-...roject-99-sr5-4wd-5-speed-25.html#post3781168
99 SR5 with stock alt, assuming 80 ampI get wildly different voltage ranges with or without the booster and depending on boost level. Stock has never given me more than 13.9.
Older 4 runner?
I realize this is an older post. Was about to do the GM diode with a fuse mod on my 2006 4Runner bought the parts decided to run some tests before mod. But now having doubts. I’m getting 14.0v at alt. And my Odyssey battery 34R says float charge at 13.5-13.8. Cycle charge 14.4-14.8. Running at cycle charge will shorten lifespan of battery according to Odyssey and everything else I read. I do have quite a bit of draw on my system, 1.600 watts stereo, light bar with 4 additional light and a bunch of other mods. My alt probably has less than 10k on it.
I was going to do the add a fuse with the fuse and diode, not about to run a straight diode.
Now I may have messed this up by charging my battery the previous day. I’m taking readings directly off the alt and the battery both for comparison. But yeah a charged battery will affect the reading off the alt. I tried running it down with about everything on. Was able to get it to drop to the 14.0 at alt and 13.8 at battery after running it for a while.
Any thoughts or suggestions?