Any problems with this lift package?

[Duke]

I've searched this forum far and wide and couldn't find anything directly answering this question, unless I'm blind.
Just wondering if a 1" front leveling kit + spidertrax wheel spacers + 265/70/17 tire would cause any problems or excessive rubbing. I've seen a website on how to fix the rubbing but would like to avoid it. Any problems with this??
One last question: any difference in quality or amount of lift between these two types of front lifts:

http://www.allprooffroad.com/034runnerfrontsuspension/270

and

http://www.burtmanindustries.com/zoomprod.php?id=4run_03_up_liftkit&opt[7220]=1192046912

 

[NJrunner11]

i havent posted in here in forever, but it sucks no one answered you.. yes that combination will work fine, no worries........

and i would go with the allprooffroad lift. they are both the same thing besides material used. the allpro one looks like a daystar which is what i have and its awesome... plus its cheaper.


but if you want an even better deal, and dont mind 1.25" inch lift in the front order it from here... quarter inch isnt much, plus is 40$

http://www.wheelersoffroad.com/03up4rundstrlift.htm

(first one under "-FRONT-" is what you are looking for)

 

[MLSD]

I have the Cornfed 1 inch front leveling spacer and spidertrax wheel spacers on 265/6/18 which are 10.43" wide 30.52" tall. I have no rubbing at all. Your tires are about a half in wider and about 1.5 inches taller, but I'd be surprised if you rubbed much if at all.

 

[ric]

from my understanding, now granted Ive never had them myself, but Ive the Poly stuff wont last as long as alum. or steel spacers.
I did run the Cornfeds for about 3 years, its hard on the stock springs.
have you looked at toyteclifts.com ?

 

[dylanc]

That looks like part of the old Daystar kit, which can be found at wheelers for $40.

 

[Duke]

Thanks folks for the input! It's greatly appreciated. Right now I think I'm going to go with the wheelers offroad 1.25" front lift with the spidertrax. Will post pics soon hopefully!