Anyone running 883s on Tunrda 5100s?

[hungryeddy]

i got a lead on a used set of 883s. i don't have any weight on the front end (no bumper, winch, ect.) but since they have the tendency to sag down a bit (these are a year old), i figured these might work. any thoughts?

 

[hungryeddy]

or any other OME springs on a set of 5100's from a tundra? after reading that the taco 5100's aren't the best for a 3rd gen, i much rather find some springs that will fit the tundra 5100's.... the TRD springs are way to hard to find and i'm going to explore other options before i buy them new.

 

[rickashay]

or any other OME springs on a set of 5100's from a tundra? after reading that the taco 5100's aren't the best for a 3rd gen, i much rather find some springs that will fit the tundra 5100's.... the TRD springs are way to hard to find and i'm going to explore other options before i buy them new.

The Tundra coils have a larger diameter than our 4Runner and Tacoma coils. Therefore I am not sure if a OME coil (such as the 883) will seat correctly in the Tundra 5100's.

 

[South-O 4RnR]

I'm running 5100's with 883's up front. I'm not sure which 5100's they are (which doesn't help you much), since I had them installed at the Truck shop in SD. I have a 2whl without any weight up front. I do feel the extra 'stiffness' when climbing speed bumps, but otherwise they handle brilliantly.

 

[rickashay]

I'm running 5100's with 883's up front. I'm not sure which 5100's they are (which doesn't help you much), since I had them installed at the Truck shop in SD. I have a 2whl without any weight up front. I do feel the extra 'stiffness' when climbing speed bumps, but otherwise they handle brilliantly.

There are Tacoma/4Runner 5100's AND Tundra 5100's. Tundra's have 5 perches for adjustment, the Taco/4Runner ones have 3 perches.

 

[South-O 4RnR]

Tundra it is then, I'm running on the 3rd perch. Tried to run it higher, but the ride was way too stiff.