ARB Rear Diff Breather Install Question

[uh0h50]

I installed this kit on my 2016 SR5 this past weekend and it is my understanding that there needs to be some slack left on the end of the hose (nearest the diff). Would anyone happen to have a photo or two of how much of the hose slack should be left and how the slack is left hanging? Second guessing my installation and want to make sure I did it correctly. The few pictures I've seen are not entirely clear. Thanks in advance.

 

[Ak1m0to]

Check youtube, there are a few vidoes that shows you on the install.
I would leave about a foot or foot and half, it's just enough for the rear to drop without pulling the line.

 

[BobsTrail]

From the stickies above, good write up on installing the breather hose with photo for hose run from the diff. Rear Diff Breather - Toyota 4Runner Forum - Largest 4Runner Forum

 

[Cymon]

I installed this kit on my 2016 SR5 this past weekend and it is my understanding that there needs to be some slack left on the end of the hose (nearest the diff). Would anyone happen to have a photo or two of how much of the hose slack should be left and how the slack is left hanging? Second guessing my installation and want to make sure I did it correctly. The few pictures I've seen are not entirely clear. Thanks in advance.

Check post #10 here.

Rear Differential Breather Mod For Dummies