Are you preparing for the fall road trip? —— Lasfit Floor Mats Testing Invitation

[Salvo Jimmy]

OK last attempt


Here are photos of my Husky front and rear. They are deeper and I added some black silicone caulk to block the channel on the front to prevent liquid from flowing back onto the carpet beside the front seat. Also covered the hold down clips with black gorilla tape to prevent liquid from going in them to the carpet. Rear does not have those problems.

 

[Salvo Jimmy]

try renaming the file to something like thumb 1, thumb2, thumb3, etc.[/QUOTE

Thanks for suggestion. Did that and even converted one to pdf at 2.5 MB. Upload failed even though way below the 13MB allowed. I’m done with it.

 

[Humble Leader]

try renaming the file to something like thumb 1, thumb2, thumb3, etc.[/QUOTE

Thanks for suggestion. Did that and even converted one to pdf at 2.5 MB. Upload failed even though way below the 13MB allowed. I’m done with it.

13MB is a huge picture. if I take a pic on my iphone I save it to my desktop, open it in paint and resize the image to be a lot smaller, around that 2.5MB size. I save it as a jpeg and not a pdf and upload it using the paper clip icon in the posts. maybe it's the pdf format

 

[Salvo Jimmy]

13MB is a huge picture. if I take a pic on my iphone I save it to my desktop, open it in paint and resize the image to be a lot smaller, around that 2.5MB size. I save it as a jpeg and not a pdf and upload it using the paper clip icon in the posts. maybe it's the pdf format

My first attempt was with jpeg at about 80 KB, next was rename 80 KB jpeg as suggested by mrblah, then tried the pdf, all well below what site says it will accept, none worked to display. They just upload, that’s it.

 

[Humble Leader]

My first attempt was with jpeg at about 80 KB, next was rename 80 KB jpeg as suggested by mrblah, then tried the pdf, all well below what site says it will accept, none worked to display. They just upload, that’s it.

maybe it's the old vbulletin software the forum is running. the version running on this website was released I think in 2016 haha. maybe time for an upgrade!

 

[Salvo Jimmy]

One last try




Here are photos of my Husky front and rear. They are deeper and I added some black silicone caulk to block the channel on the front to prevent liquid from flowing back onto the carpet beside the front seat. Yellow Also covered the hold down clips with black gorilla tape to prevent liquid from going in them to the carpet. Red Rear does not have those problems.

 

[mrblah]

A trick I do is upload the pic to your email and then redownload it at a smaller file size and rename the file also.

Actually that’s what I do to upload to this forum. It wouldn’t accept otherwise

 

[Salvo Jimmy]

One last try




Here are photos of my Husky front and rear. They are deeper and I added some black silicone caulk to block the channel on the front to prevent liquid from flowing back onto the carpet beside the front seat. Yellow Also covered the hold down clips with black gorilla tape to prevent liquid from going in them to the carpet. Red Rear does not have those problems.[/QUOTE


Trying mrblah approach

 

[Salvo Jimmy]

Forgot to rename. So sent to my email, downloaded to files at about 90KB and renamed

Here are photos of my Husky front and rear. They are deeper and I added some black silicone caulk to block the channel on the front to prevent liquid from flowing back onto the carpet beside the front seat. Yellow Also covered the hold down clips with black gorilla tape to prevent liquid from going in them to the carpet. Red Rear does not have those problem

 

[Salvo Jimmy]

Forgot to rename. So sent to my email, downloaded to files at about 90KB and renamed

Here are photos of my Husky front and rear. They are deeper and I added some black silicone caulk to block the channel on the front to prevent liquid from flowing back onto the carpet beside the front seat. Yellow Also covered the hold down clips with black gorilla tape to prevent liquid from going in them to the carpet. Red Rear does not have those problem

 

[Salvo Jimmy]

Interesting. First time I uploaded the renamed files they were there. Then I edited the text, saved and photos disappeared. Hence the 2nd post.

Thanks mrblah

The software on this site is seriously hosed up.

 

[mrblah]

Interesting. First time I uploaded the renamed files they were there. Then I edited the text, saved and photos disappeared. Hence the 2nd post.

Thanks mrblah

The software on this site is seriously hosed up.

Yeah man this forum is really weird with pics

 

[TRD PANTHER]

I really like these floor mats, and I'm planning to submit my pictures and review for these, but one major annoyance that I'd love an answer on is why the heck these rings don't stay in place. I drove in sandals and barely moved my feet and noticed that both of these came loose from basic driving around town. Seems like a serious safety hazard

Same problem. Yes, a potential serious safety hazard. My apologies to the forum members in this thread that I didn't report this earlier, as I knew about this for over a month since receiving them on July 30. Could have saved some of you some trouble. I like the rubberized feeling and they lay nice, but the ring design is terrible. As you can see from my pics, they are a two piece collared flange with a smooth I.D. on one half and a small thread like feature on the O.D. on the other half. Not a threaded helix. I am 6'3" 220 lbs. and wear cowboy boots 90% of the time. When I get in and my heel digs into these mats the rings split apart. Even if you push them real hard together there is still not enough grip to keep them together after a short while. They need to be glued together with super glue or something that will fuse the plastic rings together. Obviously, in the right orientation. Probably not worth the time and effort to ship them back. They were $99 for the whole set delivered. Maybe, Lasfit will send me a refund or a new ring design.

 

[TRD PANTHER]

Not sure why the pics didn't post. Anyone have any ideas why the downloading image function isn't working?

I need to create a Thread on this dangerous and poor design. Waiting for the image function to work properly again.

 

[Salvo Jimmy]

Not sure why the pics didn't post. Anyone have any ideas why the downloading image function isn't working?

I need to create a Thread on this dangerous and poor design. Waiting for the image function to work properly again.

You will be waiting forever. See previous posts in this thread by mrblah and myself on how to get a photo to be seen. However, the ones I finally got posted have now disappeared.��

 

[97BlackAckCL]

Same problem. Yes, a potential serious safety hazard. My apologies to the forum members in this thread that I didn't report this earlier, as I knew about this for over a month since receiving them on July 30. Could have saved some of you some trouble. I like the rubberized feeling and they lay nice, but the ring design is terrible. As you can see from my pics, they are a two piece collared flange with a smooth I.D. on one half and a small thread like feature on the O.D. on the other half. Not a threaded helix. I am 6'3" 220 lbs. and wear cowboy boots 90% of the time. When I get in and my heel digs into these mats the rings split apart. Even if you push them real hard together there is still not enough grip to keep them together after a short while. They need to be glued together with super glue or something that will fuse the plastic rings together. Obviously, in the right orientation. Probably not worth the time and effort to ship them back. They were $99 for the whole set delivered. Maybe, Lasfit will send me a refund or a new ring design.

Yeah, I was waiting to post my review until I got an answer on these rings, I think I will replace them and go back to my Oedro mats which did not have this issue. I really like the look and feel of these mats, but those rings coming loose under my feet while I'm driving is a deal breaker to me

 

[lasfit]

This has been posted by them before. I tried to do the test by responding but several back and forth with them asking questions about what I was looking for, what I liked and disliked about my huskies, etc, never resulted in me getting anything to test.

Please post if you ever get any test mats

My take, just fishing for ideas to improve their product.

We're sorry for your unpleasant experience and the inconvenience. After you brought up this problem our team had a meeting and discussed about your feedback and analyzed the whole problem, figuring out how to bring in the best service in any brand campaign. And we also sent you an email last week. Could you kindly check your inbox? Thank you.

Our program of Lasfit products testing on the forum initially was created to help find those 4Runner owners who are highly interested in testing after-market products and have creative ideas of products testing and content creation, and help many more enthusiasts build their T4R. We care deeply about your concerns and if our products would satisfy your needs, and expect to hear your real thoughts, positive or negative.

We appreciate that you shared your opinions on floor mats with us, and we believe that you can have a really unbiased opinion of any products that you have used. We noticed this when we received your in-depth replies during our last emails. We already reported your feedback to our product managers and will let you know once we have deeper mats available in the future. We also improved our program rules, to let more members to join our products testing program easily.

Sorry again for the inconvenience caused by us and really thanks for your attention to following our floor mats. If you're still interested in testing the floor mats or have any suggestions, feel free to contact us!

Thank you for your time!
Lasfit Team

 

[lasfit]

Yeah, I was waiting to post my review until I got an answer on these rings, I think I will replace them and go back to my Oedro mats which did not have this issue. I really like the look and feel of these mats, but those rings coming loose under my feet while I'm driving is a deal breaker to me

Same problem. Yes, a potential serious safety hazard. My apologies to the forum members in this thread that I didn't report this earlier, as I knew about this for over a month since receiving them on July 30. Could have saved some of you some trouble. I like the rubberized feeling and they lay nice, but the ring design is terrible. As you can see from my pics, they are a two piece collared flange with a smooth I.D. on one half and a small thread like feature on the O.D. on the other half. Not a threaded helix. I am 6'3" 220 lbs. and wear cowboy boots 90% of the time. When I get in and my heel digs into these mats the rings split apart. Even if you push them real hard together there is still not enough grip to keep them together after a short while. They need to be glued together with super glue or something that will fuse the plastic rings together. Obviously, in the right orientation. Probably not worth the time and effort to ship them back. They were $99 for the whole set delivered. Maybe, Lasfit will send me a refund or a new ring design.

Hello guys, we're sorry for the troubles and the inconveniences caused by the ring design. We have reported the problem to our product managers and already redesigned the rings. The new rings fix with the factory hooks firmly, and won't keep disconnecting from the hooks.
We would like to send you [MENTION=51033]97BlackAckCL[/MENTION] [MENTION=286880]TRD PANTHER[/MENTION] a set of brand-new floor mats for free with the redesigned rings. Could you kindly contact us by email and tell your order information? We'll send the new version to you immediately once they are available.
Really thanks for your feedback!

Best Regards,
Lasfit Team

 

[97BlackAckCL]

Hello guys, we're sorry for the troubles and the inconveniences caused by the ring design. We have reported the problem to our product managers and already redesigned the rings. The new rings fix with the factory hooks firmly, and won't keep disconnecting from the hooks.
We would like to send you [MENTION=51033]97BlackAckCL[/MENTION] [MENTION=286880]TRD PANTHER[/MENTION] a set of brand-new floor mats for free with the redesigned rings. Could you kindly contact us by email and tell your order information? We'll send the new version to you immediately once they are available.
Really thanks for your feedback!

Best Regards,
Lasfit Team

Email sent to [email protected]

 

[TRD PANTHER]

Hello guys, we're sorry for the troubles and the inconveniences caused by the ring design. We have reported the problem to our product managers and already redesigned the rings. The new rings fix with the factory hooks firmly, and won't keep disconnecting from the hooks.
We would like to send you [MENTION=51033]97BlackAckCL[/MENTION] [MENTION=286880]TRD PANTHER[/MENTION] a set of brand-new floor mats for free with the redesigned rings. Could you kindly contact us by email and tell your order information? We'll send the new version to you immediately once they are available.
Really thanks for your feedback!

Best Regards,
Lasfit Team

Sent an email to you at [email protected]
Thank you