Baja Rack vs. Gobi Stealth Rack
- Thread starter sgsymon
- Start date
SeattleMike
New member
Does it curve down in the middle or is it just me?
Both, depending on which eye I close.
Can you post some pics?
Sure, I'll put some up this weekend.
tlflow
New member
Gobi
I have been happy with the Gobi, it is well made (USA) and looks nice.
It's flat too, so a little higher in the front.
I have taken a couple of trips (30 hr HW/ similar time off-road). No issues.
You can hear some wind noise, but I expected that.
Light Tabs front (4) and back (2) are nice.
There are already a lot of pics out there, and here are some more:
I have been happy with the Gobi, it is well made (USA) and looks nice.
It's flat too, so a little higher in the front.
I have taken a couple of trips (30 hr HW/ similar time off-road). No issues.
You can hear some wind noise, but I expected that.
Light Tabs front (4) and back (2) are nice.
There are already a lot of pics out there, and here are some more:
Attachments
mikey's2010SR5
New member
How was it prewired for lights? I am looking to get a rack and was going to get the Baja because of price. But if the Gobi is prewired as you say, i might steer that way (and because I like it better). I might be willing to pay the extra mulla with the tax return.
tlflow
New member
wiring
It has wires pulled inside the rack (front&back), you still have to build a harness and connect everything, but should be a little cleaner looking and protect the wires a little more. I don't think 'pre-wired' is enough to offset price difference (what is the price of the new design?). I think Baja offers a light harness for some of their racks.
It has wires pulled inside the rack (front&back), you still have to build a harness and connect everything, but should be a little cleaner looking and protect the wires a little more. I don't think 'pre-wired' is enough to offset price difference (what is the price of the new design?). I think Baja offers a light harness for some of their racks.
iDRiVaT4R
New member
I think Bajarack will consider this flat one as the low profile model, so most likely the one with sides will be similar in height to the FJ Full length rack as seen here...http://i822.photobucket.com/albums/zz146/Bajarack/Baja Rack FJ pictures/BR-TYFJ-LP-1-0-Pic1.jpg
harper7
Senior Member
Supposedly next week for the flat utility ones to be released as they were having the brackets made up last week.
No idea on the low profile one with sides.You were asking before about the height of the sides and I'd say probably the same as the FJ one . How high did you want the sides?Now would be a good time to give your input to them as the design is probably not even finalized yet.E-mail Sergio at Bajarack.
AArmour_4runner
New member
Im going wity the gobi rack with 4 lights up front and 2 in the rear.
joneseyyy
New member
I emailed about getting a full length low-profile rack and got the following reply yesterday. I am between the flat rack and the low-profile full-length. Any guess on shipping these monsters to the East Coast?
Hi Ben,
Thank you for contacting BajaRack!
You are in luck. We make several “long” low-profile racks for the gen 5 4Runner.
1. BR-TY4RG5-1-0: Full length basket-style Bajarack, 62” long x 46” wide x 5” tall (low profile), 58 lbs, $650.00.
2. BR-TY4RG5-LG-1-0: Extended length basket-style Bajarack, 91” long x 46” wide x 5” tall (low profile), 65 lbs, $925.00.
3. BR-TY4RG5-UT-1-0: Flat Utility rack (wind deflector angles downward in front), 91” x 46” x 1.5” (Very low profile), 65 lbs, $850.00.
All of our racks are 1-piece steel tubing construction with zinc primer and durable black matte powder coat; they include all mounts, stainless steel hardware, and aluminum wind deflectors.
Prices do not include sales tax (CA only) and shipping.
Hi Ben,
Thank you for contacting BajaRack!
You are in luck. We make several “long” low-profile racks for the gen 5 4Runner.
1. BR-TY4RG5-1-0: Full length basket-style Bajarack, 62” long x 46” wide x 5” tall (low profile), 58 lbs, $650.00.
2. BR-TY4RG5-LG-1-0: Extended length basket-style Bajarack, 91” long x 46” wide x 5” tall (low profile), 65 lbs, $925.00.
3. BR-TY4RG5-UT-1-0: Flat Utility rack (wind deflector angles downward in front), 91” x 46” x 1.5” (Very low profile), 65 lbs, $850.00.
All of our racks are 1-piece steel tubing construction with zinc primer and durable black matte powder coat; they include all mounts, stainless steel hardware, and aluminum wind deflectors.
Prices do not include sales tax (CA only) and shipping.
Hi Ben,
Thank you for contacting BajaRack!
You are in luck. We make several “long” low-profile racks for the gen 5 4Runner.
1. BR-TY4RG5-1-0: Full length basket-style Bajarack, 62” long x 46” wide x 5” tall (low profile), 58 lbs, $650.00.
2. BR-TY4RG5-LG-1-0: Extended length basket-style Bajarack, 91” long x 46” wide x 5” tall (low profile), 65 lbs, $925.00.
3. BR-TY4RG5-UT-1-0: Flat Utility rack (wind deflector angles downward in front), 91” x 46” x 1.5” (Very low profile), 65 lbs, $850.00.
All of our racks are 1-piece steel tubing construction with zinc primer and durable black matte powder coat; they include all mounts, stainless steel hardware, and aluminum wind deflectors.
Prices do not include sales tax (CA only) and shipping.
Hi Ben,
Thank you for contacting BajaRack!
You are in luck. We make several “long” low-profile racks for the gen 5 4Runner.
1. BR-TY4RG5-1-0: Full length basket-style Bajarack, 62” long x 46” wide x 5” tall (low profile), 58 lbs, $650.00.
2. BR-TY4RG5-LG-1-0: Extended length basket-style Bajarack, 91” long x 46” wide x 5” tall (low profile), 65 lbs, $925.00.
3. BR-TY4RG5-UT-1-0: Flat Utility rack (wind deflector angles downward in front), 91” x 46” x 1.5” (Very low profile), 65 lbs, $850.00.
All of our racks are 1-piece steel tubing construction with zinc primer and durable black matte powder coat; they include all mounts, stainless steel hardware, and aluminum wind deflectors.
Prices do not include sales tax (CA only) and shipping.
Similar threads
