Black Friday 2020 Deals
- Thread starter DragonRunner
- Start date
- Status
LakeRunner20
New member
Thanks for doing this; Any word on LFD products? [MENTION=136636]jafrush[/MENTION]
jafrush
New member
We're going to start announcing them next week, but if there's something you have your eye on send us a message
LakeRunner20
New member
[MENTION=136636]jafrush[/MENTION] Thank you sir!
4Runnin4Fun
New member
SherpaEquipmentCo
official vendor
We will be running a 15% off sale starting the 15th through the 30th for Black Friday!
That is 15% off roof racks, drawer systems and all Sherpa accessories!
<iframe width="560" height="315" src="https://www.youtube.com/embed/Syc9iytlMwo" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Sherpa Equipment Company
That is 15% off roof racks, drawer systems and all Sherpa accessories!
<iframe width="560" height="315" src="https://www.youtube.com/embed/Syc9iytlMwo" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Sherpa Equipment Company
Crikeymike
Senior Member
Those new Smittybilt's look pretty darn good.
RedRunner-14
New member
Anybody know what the cheapest full roof length roof rack would be?
Boort
Member
Not sure about the cheapest, but the Sherpa, ESP with 15% off BF sale posted above, would be my recommendation. It'd be hard to beat a Crestone for under $800.
Boort
DragonRunner
New member
Added Sherpa and MyMedic. MyMedic is a solid deal for some quality kits.
gimlithepirate
New member
RCI seems to be running a 15% off sale. Been a while since they've done anything.
Now I just need to decide, steel or aluminum for my skid plates xD
Now I just need to decide, steel or aluminum for my skid plates xD
MAST4R
New member
I would say it depends on suspension and lift, in addition to use. The softer the suspension, the stronger the argument for steel, especially for the front skid. I would not want an aluminum front regardless and I have not felt the steel at all (I am all steel underneath) in any way, including mpg. In fact, my mpg is very close to stock even though the weight of the vehicle is about +300lb and then LTE tires on top of that (but my tires are stock size). But considering what my front 3/16 steel plate looks like, I would have had to replace an aluminum one already.
On a related note, looks like prices keep creeping up. Some simple rear bumpers have actually jumped quite a bit. Technically, overall inflation is very low, but you wouldn't know it if you are modding a 4Runner...especially when you account for the fact that discounts are smaller and less common.
gimlithepirate
New member
Wait, so you'd say steel on a softer suspension? Why's that?
I've gone back and forth a few times. This is my first big weight addition other than LT E tires. That said, my other mod this winter will be a bumper/winch, so another 200 lbs, and I'd eventually like to put on a rear bumper...
Just feels like I should save weight where I can.
Aluminum prices at most places are a lot higher. I noticed SOS has quit offering an aluminum option on their website for their bumpers. It's too bad, I was thinking of going that way.
I've gone back and forth a few times. This is my first big weight addition other than LT E tires. That said, my other mod this winter will be a bumper/winch, so another 200 lbs, and I'd eventually like to put on a rear bumper...
Just feels like I should save weight where I can.
Aluminum prices at most places are a lot higher. I noticed SOS has quit offering an aluminum option on their website for their bumpers. It's too bad, I was thinking of going that way.
The general rule of thumb is for every 100lbs of weight decreases MPG by 1%. I went full aluminum armor because when the time ever comes I dent something I will go ahead and replace it. It also reduces my overall wear on the other components of the vehicle, which at some point will eat into the life components of the vehicle if you decide to add more and more weight. The odds of me needing full steel armor are rare in the event I bust something up, so I have no need for it. I think it overall depends on your needs but the full steel is not worth it for 90% of us. Save the weight, spend the extra money if there is an added costs and go aluminum.
On a side note, hopefully eBay does a $300 sale on the shittybuilt synthetic winches
On a side note, hopefully eBay does a $300 sale on the shittybuilt synthetic winches
CowboyTaco
New member
So this isn't technically a Black Friday sale, but Jackery is doing their 8th Anniversary sale today through Wednesday.
https://www.jackery.com/pages/jackery-8th-anniversary
The rep who assisted with our last group buy was able to get forum members a discount code for an additional $10 off per order that contain an Explorer 500, Explorer 1000 or SolarSaga 100W panel. Just like a group buy, I can only share the code via PM. If interested, please send me a PM and I will do my best to respond in a timely manner.
https://www.jackery.com/pages/jackery-8th-anniversary
The rep who assisted with our last group buy was able to get forum members a discount code for an additional $10 off per order that contain an Explorer 500, Explorer 1000 or SolarSaga 100W panel. Just like a group buy, I can only share the code via PM. If interested, please send me a PM and I will do my best to respond in a timely manner.
- Status
