Blinker causing CB interference

[TheThunderRunner]

So basically what's in the title. My blinkers/drls are giving me significant feedback through my cb and I'm wondering what I can do to eliminate it. Would a low loss coax cable work or would I be better off just moving the cable around. My antenna is on a comet mount on the rear hatch. The cable runs through the hatch under the driver side carpet and up to the right of the seat. Thanks in advance.

 

[Bumbo]

I would start with a ferrite choke on coax and power and go from there.

Its not the low-loss of the cable, but its the shielding that you want to improve.

 

[cosmos7]

I would start with a ferrite choke on coax and power and go from there.

Its not the low-loss of the cable, but its the shielding that you want to improve.

Exactly. Flashing a light on and off isn't that noisy... you have to be running parallel for a ways with unshielded cable.