Broken 06 Cupholder - Help finding part?

ProMed

ProMed

New member
Hey guys, I'm looking for help in finding a replacement center console cup holder insert. It is the piece that has the two arms that pop out from either side. It is for my 06 limited which has the black looking trim, I think it may be called Stone. If anyone has a link or source to pick one up I would appreciate it.

Any help would be appreciated!

Here is the best pic I could find, it is the piece behind the gear shifter.

06_4runner_console.JPG
 
Register to hide this ad
ProMed said:
Hey guys, I'm looking for help in finding a replacement center console cup holder insert. It is the piece that has the two arms that pop out from either side. It is for my 06 limited which has the black looking trim, I think it may be called Stone. If anyone has a link or source to pick one up I would appreciate it.

Any help would be appreciated!

Here is the best pic I could find, it is the piece behind the gear shifter.

06_4runner_console.JPG
Click to expand...

someone snapped one of the arms off of mine. there are some on ebay. do a search for '4runner cup holder'

http://cgi.ebay.com/ebaymotors/TOYO...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
 
Mine broke and I fixed it with JB Weld. Good as new now. Up here the dealer wanted $135.00 CDN plus tax ( no sh.. ) for the stone one, and $85.00 CDN plus tax for the black one. Go figure. One of the techs came out, looked at it and said "I fixed one of those with JB Weld once, so you could too ". So $8.00 for JB Weld, one clamp, left overnight to cure, and it's good as new.
 
43242code1 said:
just curious how you guys broke the cupholder
Click to expand...
I got too close to it with the car wash vacuum and it grabbed onto one of the arms breaking the little triangle that attaches to each arm as well as the two clips that hold the top in place. It then sucked those little parts into never never land!
 
Last edited:
ProMed,

You have the fake black wood.

I was going to link you to someone that is selling their's...but it's from a SR5 & doesn't have the fake black wood.
 
My 4R was used when i bought it. The cup holder worked fine for a while but then one day it just flew apart. When I looked at it I could see that the clips on the back that hold the top down had broken at some point and someone had fixed it with crazy glue. Now that I used the JB Weld the top is welded down and is going nowhere. The arms work fine, probably better than new as they seem a bit tighter because I really clamped it down while the weld cured. Had to make sure that I didn't get any weld on the arms themselves.
 
Last edited:
ProMed said:
Hey guys, I'm looking for help in finding a replacement center console cup holder insert. It is the piece that has the two arms that pop out from either side. It is for my 06 limited which has the black looking trim, I think it may be called Stone. If anyone has a link or source to pick one up I would appreciate it.

Any help would be appreciated!

Here is the best pic I could find, it is the piece behind the gear shifter.

06_4runner_console.JPG
Click to expand...

Mine was replaced under warranty.
 
ProMed said:
Sweet, thanks! I guess all the 06-09 Limited's have the same color trim?
Click to expand...

I think the wood trim is the same, only the leather color and plastic panels are different. '06+ I think it went from the fake granite ('03-05) to fake black wood.
 
Thanks!

I ordered a "non-limited" one off of ebay for $20 to see if I could just salvage my broken parts for it. If that doesn't work I'll order a new one from partznet with the number you provided. Partznet was over $20 cheaper than my dealer!
 
You must log in or register to reply here.

Members online

Total: 366 (members: 2, guests: 364)

Forum statistics

Threads
278,309
Messages
3,554,067
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top