Burtman cornfed spacers vs ozark mountain cornfed spacers

[Satweh]

What’s the difference in quality? How are they holding up? Thanks for the input

 

[daytonaviolet]

What’s the difference in quality? How are they holding up? Thanks for the input

I believe these are the same.

 

[mrblah]

they are spacers..buy the cheapest one

 

[Satweh]

Thank you guys, btw is there a big difference between cornfed, daystar and toytec kits? Which is the best?

 

[Satweh]

For a trd Pro.

 

[Bayou_Pro]

For a trd Pro.

Keep in mine a TRD Pro is already lifted about 0.8" stock.

 

[Satweh]

Ya, want to fit 285 70 17 k02s on it, 95 percent on road 5 percent off road, so I think a mild lift like spacer kit should be fine. But which is recommended?

 

[Bayou_Pro]

Ya, want to fit 285 70 17 k02s on it, 95 percent on road 5 percent off road, so I think a mild lift like spacer kit should be fine. But which is recommended?

Check out my thread here for another option rather then spacers, since you have a Pro. Personally I don't like spacers. I picked up everything on the forum here on the cheap. I have $300 invested in the whole lift and the truck drives and handles so much better. Oh and the brake dive is practically gone!! There was a couple sets of the 6112 springs for sale on the forum a week or so ago. Good luck.

Another Pro Lifted with 6112s (pics and measurements) UPDATES w/ mpg

 

[Satweh]

Check out my thread here for another option rather then spacers, since you have a Pro. Personally I don't like spacers. I picked up everything on the forum here on the cheap. I have $300 invested in the whole lift and the truck drives and handles so much better. Oh and the brake dive is practically gone!! There was a couple sets of the 6112 springs for sale on the forum a week or so ago. Good luck.

Another Pro Lifted with 6112s (pics and measurements) UPDATES w/ mpg

Thanks, I want a max 2 inch lift, cause I don’t want to change control arms yet. hopefully the 285s will fit with the mud flap removal.

 

[Bayou_Pro]

Thanks, I want a max 2 inch lift, cause I don’t want to change control arms yet. hopefully the 285s will fit with the mud flap removal.

You'ew welcome. No need to change UCAs with the 6112s.

 

[daytonaviolet]

I ended up getting the Cornfed 2/1.5 for my 285 setup.

Have you read this thread ? My TRD Pro Lift
My TRD Pro Lift - Toyota 4Runner Forum - Largest 4Runner Forum

 

[Satweh]

I ended up getting the Cornfed 2/1.5 for my 285 setup.

Have you read this thread ? My TRD Pro Lift
My TRD Pro Lift - Toyota 4Runner Forum - Largest 4Runner Forum

From ozark or burtman? How is the ride? And alignment? I’m looking at that exact setup, hows it holding up? Thanks for the feedback. Much appreciated

 

[daytonaviolet]

Well I’ve received the kit and my trd pro suspension from a 2018. My limited should arrive hopefully next week.

I just read the link I sent you last month. I went with Cornfed after reading that thread and contacted Jason. I liked the customer service provided from Burtman Industries.

I’ll feedback once I get my truck together [emoji3061]

From ozark or burtman? How is the ride? And alignment? I’m looking at that exact setup, hows it holding up? Thanks for the feedback. Much appreciated

 

[Satweh]

Well I’ve received the kit and my trd pro suspension from a 2018. My limited should arrive hopefully next week.

I just read the link I sent you last month. I went with Cornfed after reading that thread and contacted Jason. I liked the customer service provided from Burtman Industries.

I’ll feedback once I get my truck together [emoji3061]

Cool, I just ordered a set cornfed 2.0/ 1.5 and brought brands new 285s k02s from a guy with a 2019 rubicon, great deal on tires 5 for 500 bucks. The tires have less then 200 miles. So hopefully next week I’ll get the spacers and have them installed.