Busabos77’s 2016 SR5 Build Thread...

[Busabos77]

WARNING INTRO IS PIC HEAVY...

Finally starting a build thread for the 4Runner. I recently got the car to replace my Honda Pilot that was getting old and tired. Just like most of the guys here in the forum, I have done some builds before and I use this journal/build thread to look back at what I have done, as well as document every mod/repair that I have done to the car which has proven to be helpful when the time comes to sell it. I look forward to learning more about the 4runner in this forum with all the information that you guys have posted through the years!

I also wanted to share 3 significant cars (to me at least) that I have done in the past.

1998 HONDA PRELUDE (Mugen)= Keep in mind that this was in the early 2000s so forgive me if it looked a little ricey! I was young!

2004 BMW E46 M3 (CSL Vorsteiner) = here’s my long build thread for the BMW if anyone is interested. In this build, I went all out... From a variety of wheels ( WORK WHEELS, CCW WHEELS, APEX ARC8 WHEELS) to interior color change, tranny swap, etc. Busabos77's E46 M3 Journal - BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X)

2006 HONDA PILOT = Which raised some eyebrows from the 4x4 community!

So without further ado.... Here is my 2016 SR5 4RUNNER

 

[Busabos77]

Ordered Magnum RTs and had them installed. My 5 year old was having a hard time getting in the car despite the car having OEM suspension. They are pretty sturdy and looks good. I really have no plans of going hardcore off-roading but it should be easy to take it off if and when I change my mind.

 

[Busabos77]

Next up was the rear cargo net since my 4runner didn’t come with one. Found this one on (Amazon). Store says that it is for 2003-2009 models only but it fits perfectly on the 5th gen.

Here is the link for anyone who might want to get one:
https://www.amazon.com/Toyota-PT347...+cargo+net&dpPl=1&dpID=61gb0KmkAdL&ref=plSrch


Installed in my car.

 

[Roody]

I don't see ricey in that Prelude at all, it looks super clean and well-done to me. Could use a little more sidewall for my taste but I suppose that's where the 4R comes in...what do you have planned for the build?

 

[Busabos77]

I don't see ricey in that Prelude at all, it looks super clean and well-done to me. Could use a little more sidewall for my taste but I suppose that's where the 4R comes in...what do you have planned for the build?

Oh man! The prelude was during the early 2000s, which explains the thin sidewalls. LOL. It’s long gone now. I am still learning and researching more about the 4runner. What I have in mind mostly are basic things. Lift with a good suspension but not too crazy since I don’t really go off-roading. I really want to get rid of the nosedive. I’m looking at some toytec kits but the shop here in VT gave me an estimate of $900 to install! Might find another shop or do it myself when I have the time. Upgrade wheels and tires. Maybe a nice full rack. I’m sure it will keep adding up.

 

[Busabos77]

Did whole interior and exterior LED conversions.

Auxbeam T1 Series Before and After shots

BEFORE AND AFTER

 

[Busabos77]

Been a while since my last update. Finally started coming together and lifting the car soon. Will post photos. In the meantime...

Black out covers for emblems were installed.

Tires came in today! 295/70/17 BFGoodrich KM3s

Currently how the car sits today before the lift and wheels/tires install. I’ll post more details about the suspension set up soon.

 

[daytonaviolet]

What suspension will you be using [emoji13][emoji13]

 

[Battle Born Offroad]

Nice tires! Let us know if we can hook you up with a matching suspension

 

[str8flexed]

295! Will be interested in whether you need to hammer:cut your pinch welds. I am debating going that big....

 

[Busabos77]

What suspension will you be using [emoji13][emoji13]

5 stage clear coat/chip guard/flex/sealer and carbon fiber vinyl weather wrap rust prevention process on shocks

Toytec Rear Superflex HD coil springs Toytec
Front Diff Drop
Toytec Boss 2.0 Rear Shocks
Eibach Pro Front Struts (3")
Eibach Pro Front Springs
SPC Premium Adjustable Upper Control Arms
Timbren Active OR Rear Bumps Stops

On a side note: is your name Fern?

 

[Busabos77]

295! Will be interested in whether you need to hammer:cut your pinch welds. I am debating going that big....

BMC will be done with the install.

 

[daytonaviolet]

5 stage clear coat/chip guard/flex/sealer and carbon fiber vinyl weather wrap rust prevention process on shocks



Toytec Rear Superflex HD coil springs Toytec

Front Diff Drop

Toytec Boss 2.0 Rear Shocks

Eibach Pro Front Struts (3")

Eibach Pro Front Springs

SPC Premium Adjustable Upper Control Arms

Timbren Active OR Rear Bumps Stops



On a side note: is your name Fern?

Bakit [emoji1787]

 

[Busabos77]

Bakit [emoji1787]

Good to see you here Fern! Damn man!!! From M3forum to T4R!!!

 

[daytonaviolet]

Good to see you here Fern! Damn man!!! From M3forum to T4R!!!

i've actually had my gen4 limited since 2004.. so i've been here as a stalker for many years :lol:

 

[daytonaviolet]

Nice tires! Let us know if we can hook you up with a matching suspension

what's your url? i'd like to look around for suspensions :reddance:

 

[Battle Born Offroad]

what's your url? i'd like to look around for suspensions :reddance:

Battle Born Offroad - The Offroad Part Source! - Homepage - If you cant find it, let us know and we will link you!

 

[krelnydelnky]

Are these the T1 9005s? Was it plug and play? are you able to post a link?
Thank you!

 

[krelnydelnky]

Did whole interior and exterior LED conversions.

Forgot to quote

 

[daytonaviolet]

Did whole interior and exterior LED conversions.





BEFORE AND AFTER

Are you using the oem projectors? How’s the cutoff ?