infirewetrust
New member
The passenger side slider doesn't use all the available holes if I'm not mistaken.
Sent from my iPhone using Tapatalk
-
If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.
- Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
-
All Threads must contain the following information
- What is for sale/trade (model, specs, etc.)
- Condition
- Price/What you want to trade for
- Location of item
- At least one picture of the item for sale or for trade
- No "Feeler" Threads - Its either for sale or it isn't.
- Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
- Threads not complying with the rules will be deleted without notice.
C4 FAB **Official** Rock Sliders Group Buy #2 (Closes 3-3-17)
- Thread starter C4 Fabrication
- Start date
The passenger side slider doesn't use all the available holes if I'm not mistaken.
Sent from my iPhone using Tapatalk
Señor_Godric
New member
They seem sturdy enough but its still a mind **** with all those missing holes
Elephant_Turd
New member
Hey Caleb, any estimated time frame for my sliders? Trying to coordinate powder coating several things and it would help.
Thanks
Thanks
gp55445
New member
PEr the instruction thread, those two holes need to be drilled and use the supplied self threading screws.
infirewetrust
New member
Not seeing that information per the PDF...
http://www.toyota-4runner.org/attac...k-sliders-c4-5th-gen-4runner-rock-sliders.pdf
gp55445
New member
infirewetrust
New member
Interesting, I never did it. Hopefully they don't fall off, thanks for pointing it out!
Splatt2083
New member
Can we get a little clarification because the advertising specifically states no drilling or welding required?
gp55445
New member
I would contact C4 as I only posted what I read - waiting on my sliders.
C4 Fabrication
New member
They are DOM. All GB sliders are being built with DOM. The order form just says standard tubing because that's what you selected on the order form so you would not have to pay the extra charge for DOM.
That is correct. The seam is very easily visible on the standard tubing.
We are going by the order of the list since everyone paid so quickly. If you have not gotten a notification its most likely because your sliders are KDSS or 4th gen. We are waiting on another run of those frame mounting plates to get those sliders assembled. We should be building some of those this week.Hey I'm #6 on the list but didn't get the shipping notification. Are you guys going by the list on the GB or by who paid first ? If the latter I might have to wait a little
The next one will most likely be around this same time next year.
The next one will most likely be around this same time next year.
Those two holes are optional to drill. We provide the two 3/8" thread cutting screws in the bolt pack for those holes. You can drill a 5/16" hole in each location after the slider is installed and thread the bolts into the holes.
Those are really only required if you plan to really abuse the sliders heavily in rocks and other large obstacles.
Trust us, they are plenty strong enough! We use almost twice as many bolt locations as all the other fab companies out there offering sliders for the 5th gen.
its hard to say how quickly they will come together once we get the laser cut parts, but it will be another 6 weeks or so I would think since you are pretty much last on the list.
They wont fall off, don't worry about that! haha
Those two holes are optional to drill. We provide the two 3/8" thread cutting screws in the bolt pack for those holes. You can drill a 5/16" hole in each location after the slider is installed and thread the bolts into the holes.
Those are really only required if you plan to really abuse the sliders heavily in rocks and other large obstacles.
Picked up my 4Runner days after this closed, now experiencing major FOMO. Really want these beautiful sliders, debating whether to wait a year, buy now, or jump on the Shrockworks GB (definitely not as sexy).
trailstandardoffroad
official vendor
Well at the end of the day. The discount was around the price of shipping so around $150.
Me personally I wouldn't let $150 stop from waiting a year or ordering something I don't like as much.
Wow just gave c4 a free sales pitch. You're welcome. Lol
Me personally I wouldn't let $150 stop from waiting a year or ordering something I don't like as much.
Wow just gave c4 a free sales pitch. You're welcome. Lol
gp55445
New member
Buy once, cry once.
Señor_Godric
New member
Those two holes are optional to drill. We provide the two 3/8" thread cutting screws in the bolt pack for those holes. You can drill a 5/16" hole in each location after the slider is installed and thread the bolts into the holes.
Those are really only required if you plan to really abuse the sliders heavily in rocks and other large obstacles.
Thanks so much for that info! Can't wait to pick up my rock sliders and put them on.. Muhahahaha!!! @c4fabircation
Those are really only required if you plan to really abuse the sliders heavily in rocks and other large obstacles.
Thanks so much for that info! Can't wait to pick up my rock sliders and put them on.. Muhahahaha!!! @c4fabircation
trailstandardoffroad
official vendor
What color did you go with?
Señor_Godric
New member
I went with a flat black. I'm picking them up from the shop tomorrow.
C4 Fabrication
New member
We have more DOM tubing getting delivered today or tomorrow. We were also waiting on that to make some more 4th gen parts. We will be building and shipping yours next week.Ah yes mine are 4th gen. So I should be expecting a notification in the next day or so? Jk
Thanks! haha
No problem
2flyfishin
New member
Similar threads
