TotalAutomotiveLV
New member
One of the most popular Roof Racks for the 2010+ Toyota 4Runner.
CBI / Prinsu RoofRack Full – NON-DRILL
Product comes powder coated black with black anodized aluminum
cross-bar extrusions.
One cross bar will not be anodized as it is intended to sit behind the
wind deflector.
Weight capacity of the racks varies based on the number of crossbars
used and their configuration.
CBI does expect all consumers to use good judgement and common
sense with the loads they plan to carry using these rack systems.
The 4Runner Roof Rack Full is a modular, adjustable, and completely
bolt together full length roof rack.
Other options includes;
3/4 Length model, and
7/8 Length model
To see all options - Click Here
The Roof Rack consists of 2 laser cut side rails constructed of 1/4″
5052 aluminum plate. These rails have 3 mounting tabs each that
will allow you to bolt the rack into the 4 factory mounting holes and
3m Industrial Adhesive on each side of the roof.
The crossbars are made from a 1″ x 2″ aluminum extrusion that
have 2 top facing T-slot channel, a fore and aft channel and 2
bottom facing channels.
This offers numerous solutions for tie down options, cargo security,
and the addition of accessories such as tool mounts or lighting.
The rack comes can be ordered with a bare aluminum finish but we
list options that are powdercoated.
All assembly hardware comes in a black zinc finish so as to match
a black paint or powdercoat finish on the final product.
All mounting hardware is either stainless steel or high quality zinc
plated.
The rack also includes a 1/8″ 5052 aluminum plate wind deflector to
help with aerodynamics and prevent wind noise.
If you are looking to add a light bar, just let us know if you need a...
30" Cutout available
40" Cutout available
This allows you to add your favorite LED Lighting option.
_
CBI / Prinsu RoofRack Full – NON-DRILL
Product comes powder coated black with black anodized aluminum
cross-bar extrusions.
One cross bar will not be anodized as it is intended to sit behind the
wind deflector.
Weight capacity of the racks varies based on the number of crossbars
used and their configuration.
CBI does expect all consumers to use good judgement and common
sense with the loads they plan to carry using these rack systems.
The 4Runner Roof Rack Full is a modular, adjustable, and completely
bolt together full length roof rack.
Other options includes;
3/4 Length model, and
7/8 Length model
To see all options - Click Here
The Roof Rack consists of 2 laser cut side rails constructed of 1/4″
5052 aluminum plate. These rails have 3 mounting tabs each that
will allow you to bolt the rack into the 4 factory mounting holes and
3m Industrial Adhesive on each side of the roof.
The crossbars are made from a 1″ x 2″ aluminum extrusion that
have 2 top facing T-slot channel, a fore and aft channel and 2
bottom facing channels.
This offers numerous solutions for tie down options, cargo security,
and the addition of accessories such as tool mounts or lighting.
The rack comes can be ordered with a bare aluminum finish but we
list options that are powdercoated.
All assembly hardware comes in a black zinc finish so as to match
a black paint or powdercoat finish on the final product.
All mounting hardware is either stainless steel or high quality zinc
plated.
The rack also includes a 1/8″ 5052 aluminum plate wind deflector to
help with aerodynamics and prevent wind noise.
If you are looking to add a light bar, just let us know if you need a...
30" Cutout available
40" Cutout available
This allows you to add your favorite LED Lighting option.
_
