Hi, was curious if anyone has any knowledge or experienced coil sag with Downey Coilovers suspension for 3rd Gen 4Runner. (Model # 48095) I am currently running this setup on the front and OME 892 Coil Springs with OME N86 Shocks for the rear. When this setup was installed in October of 2004, it was pretty level with 38 1/4" from the center bottom lip of the rear fender well to the ground. The front was approx 38" respectively. I recently remeasured and noticed I have lost approx and inch off the front measuring in around 37 1/4". Is this common with normal everyday driving and very moderate off roading? I am curious,if so is the fix cranking the spanner nut up to gain the lost inch? Thanks for any responses...The truck has had approx 20K miles driven on it since intial installation.
Coil Sag Downey Coilovers 3rd Gen
- Thread starter astrodog
- Start date
