Coil spring packers too big?

[eurasiaoverland]

Hi guys

I want to trim up my rear suspension so that the truck sits level when loaded, and got two OME80PR10. However, looking at them, they appear to be considerably larger in diameter than the cone bumpers which they should fir around, to the point where I suspect they will slip out on one edge.

Did anyone else find this??

Thanks

Daniel

 

[rkntoy]

They will fit fine

 

[theriddler]

Double check your part numbers, your part number brings up this:

https://www.4wheelparts.com/Suspens...spx?t_c=1&t_s=101&t_pt=4508&t_pn=ARBOME80PR10

And you may need this:

https://wheelersoffroad.com/i-25490...2002-4runner-80pf10.html?ref=category:1389006

 

[rkntoy]

Double check your part numbers, your part number brings up this:

https://www.4wheelparts.com/Suspens...spx?t_c=1&t_s=101&t_pt=4508&t_pn=ARBOME80PR10

And you may need this:

https://wheelersoffroad.com/i-25490...2002-4runner-80pf10.html?ref=category:1389006

Good catch - the PR is for the rear of Landcruiser 80 series. Our rears interchange with 80 fronts - which is the PF

 

[eurasiaoverland]

Double check your part numbers, your part number brings up this:

https://www.4wheelparts.com/Suspens...spx?t_c=1&t_s=101&t_pt=4508&t_pn=ARBOME80PR10

And you may need this:

https://wheelersoffroad.com/i-25490...2002-4runner-80pf10.html?ref=category:1389006

Ah crap, I have the wrong ones then I've sent an email to the supplier to see if I can exchange them.

Thanks very much for checking this and clearing it up

 

[theriddler]

:doh:
Better yet, get yourself an 80 series too:eyebrows:

 

[eurasiaoverland]

:doh:
Better yet, get yourself an 80 series too:eyebrows:

Not a big fan of the 80 to be honest. If I got a third truck it would be a 105 or possible a 78 Troopie... but I prefer these lighter duty trucks.