I need some help ya'll. I have a '97 4Runner that I just lifted 2.5". After the lift I noticed grease on the inside of the wheelwell and side of lower engine. Upon further investigation, I found that my boots over the CV joints no longer seem to be long enough. Does anyone have any suggestions as to what the problem is?
Cv Boots
- Thread starter edub152
- Start date
Register to hide this ad
4X4snowRunner
New member
CV boot
You need to install diff. drop to help not to stress your cv joint to much. And check your cv boot if it
You need to install diff. drop to help not to stress your cv joint to much. And check your cv boot if it
4X4snowRunner
New member
Diff. Drop
About 1 hour w/ trimming the skid plate. It comes with instruction.
http://www.sonoransteel.com/store_tapered_diff_drop.html
About 1 hour w/ trimming the skid plate. It comes with instruction.
http://www.sonoransteel.com/store_tapered_diff_drop.html
