Did I screw up?

[Techenigma]

Long story short here, the other day I saw my rear tail light as broken it looked as though a child had launched a baseball into it and it broke the plastic on it. I really liked those tail lights too, the JDM ones.
So anyway I took those off, and put my old stock ones back on. But now my turns signals aren't working... I now have the feeling I didn't swap something from the ones I threw out that I should have.

What am I missing?

 

[Derek]

Make sure that ALL of the bulb sockets (3 on each taillight) are snapped into place correctly. This same thing happened to me when I installed the '06 taillights, and it was because I didn't snap the middle socket into the locking position. Check all 3 and make sure you can't turn them clockwise any further, then go from there.

 

[AlexJet]

Make sure that ALL of the bulb sockets (3 on each taillight) are snapped into place correctly. This same thing happened to me when I installed the '06 taillights, and it was because I didn't snap the middle socket into the locking position. Check all 3 and make sure you can't turn them clockwise any further, then go from there.

Agreed. Test all connections.